Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Johnny7534
    Guest

    Konica 6500 (Ikon cpp650) error code c-1101

    Ok so I just got a new to me Ikon cpp650. If I have the finisher on it I can only use the copier to make copies from the glass. If I send a job from workstation it throws c1101 code. If I try to select a different output tray it throws code. Tried to use the punch feature same thing. If I take finisher off I can send send jobs from workstation on the network and print the configuration pages which won't print with finisher. I tried to put the finisher on it from my bizhub 750 but cpp650 wouldn't recognize it. Any ideas of what I can do to use this finisher? Thanks john

  2. #2
    Technician
    Konica 6500 (Ikon cpp650) error code c-1101


    Join Date
    Nov 2015
    Location
    Christiansted
    Posts
    32
    Rep Power
    18

    Re: Konica 6500 (Ikon cpp650) error code c-1101

    From the service manual: Problem: Shift unit does not reach the shift position or the home position within the specified time. Solutions: 1) FNS control board (FNSCB) 2) Shift roller Motor (M2), 3) Shift roller home sensor (PS18).

    I would start with checking the sensor and making sure its clean. Then, check the M2 motor. Its unlikely that it will be the control board, but, if 1 & 2 fail, try that.

    I hope this helps!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here