Thanks: 
Likes: 
Dislikes: hi,
i have a new accuriopress c2060 and i have this problem when i print on 300gr width paper. on 130gr its normal.. any body know this prob
thx
hi,
i have a new accuriopress c2060 and i have this problem when i print on 300gr width paper. on 130gr its normal.. any body know this prob
thx
Originally Posted by topimpress
Dev units, check them for voiding, all of em
I think it's pretty obvious that it's the magenta developing unit. Yellow + magenta = red. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I would agree, I had a c1060 do that exact symptom but it was the yellow Dev in that case on a pretty new piece of gear.
Regards!
A.
but why on 135gr the result is perfect...???
Have you set the correct papeweight into the machine as the image looks unfused.
The machine uses different belt / Dev speeds based on weight. The heavier the stock, the slower the speed, at lower speeds the Dev doesn't fill the mag roller effectively if low on Dev.
Regards
Posting Permissions
Reply With Quote
Bookmarks