Hi.
Bought a used machine. The machine says "only black and white printing is possible".
Have tried to update firmware but without success.
Any ideas are welcome
// Thanks
Hi.
Bought a used machine. The machine says "only black and white printing is possible".
Have tried to update firmware but without success.
Any ideas are welcome
// Thanks
This is because your colour drums have exceed life.
You can disable this message in CE mode.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
When first entering service mode press stop zero then clear. There is a dc/dev or image unit/ something life button hit that then no stop. Also go into system 2 then the software switch setting for switch 55 has to read 00001100 which displays 0C and switch 51 to 1111000 which reads as F0.
Thanks for quick response , will try this and come back
// Thanks
Check and make sure user authentication is turned off. If former owner had authentication in use and just deleted names and left authentication enabled, color copies won't be an option.
Lee
The Copy Guys.
Drop us an email, all firmware & advice available
https://www.copierfirmware.co.uk/
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Pretty sure even with no stop turned on it still eventually forces you to replace drums
Jip had that today. All switches and setting was done and the machine just stopped printing color.
Whatever
Hi.
Lifestop is set to "OFF" and authentication is turned off.
System software switches is also ok
//Thanks
Bookmarks