Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Junior Member
    Join Date
    Jul 2017
    Posts
    6
    Rep Power
    0

    bizhub c35 firmware?

    I recently was given a bizhub c35 copier. it works great, but i've got an imaging unit replacement notification. It prints fine for now, but want to do the c35 life stop settings (bizhub C35
    Way to change Life attention message (Updated in July, 2013)). From what i read, there is no need to buy reset chips.

    the life stop pdf refers to the latest firmware update, so i need to update the firmware, but i cannot find it anywhere. anyone knows where to find the firmware and what the instructions for update are?

    kind regards


  2. #2
    Trusted Tech 50+ Posts HitMan's Avatar
    Join Date
    Aug 2015
    Location
    Edinburgh
    Posts
    77
    Rep Power
    5
    If the drum notification is there and it's working it may already have been set up to no stop for the life's?


  3. #3
    Junior Member
    Join Date
    Jul 2017
    Posts
    6
    Rep Power
    0

    Re: bizhub c35 firmware?

    is there a way to easily check?


  4. #4
    Senior Tech 100+ Posts
    Join Date
    Nov 2011
    Location
    Jacksonville, Fl
    Posts
    208
    Rep Power
    15

    Re: bizhub c35 firmware?

    Last I remember, there are two FW, depending on the MFB serial #. Mine is running Ctlr FW A12130G0011005 Engine FW A12150G0020000. It's just a trade in IDK if/when the fw was updated. This fw shows on page 5 IU Yield settings: standard/long. I'd have to get the bulletin to remember where the stop/suspend settings are.


  5. #5
    Junior Member
    Join Date
    Jul 2017
    Posts
    6
    Rep Power
    0

    Re: bizhub c35 firmware?

    i've got the following information (see below):

    "
    my machine information shows:
    rom versie (rom version)Controller ROM-versie
    A12130G0064005Machine ROM-versieA12150G1090000Boot ROM VersieA12199G0040000ROM-versie displayA12120G0014805ROM-versie scannerA12123G0030700ROM-versie faxbordA12140G0011200
    "


    it even shows one toner missing, while it is inserted?!

    anyone who can help me with firmware update for the life stop. the life stop pdf speaks of the following, but cannot find firmware updates anywhere. the life stop pdf manual mentions:

    "Update controller/ Engine FW to the followings:
    C t ll ontroller-FW (Mass-P d ti ) roduction): A121-30G0-1303-05
    Engine-FW (Special): (50G1) A121-50G0-1200-00
    (Mass-Production): (50G0) A121-50G1-1200-00
    "


    any help is appreciated.


  6. #6
    Field Service Engineer 1,000+ Posts
    bizhub c35 firmware?

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    2,177
    Rep Power
    39

    Re: bizhub c35 firmware?

    Update to the latest engine & controller firmware then change these settings.

    It does work even if your machine as reached "lif stop"

    C35 Life Extend.pdf

    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  7. #7
    Junior Member
    Join Date
    Jul 2017
    Posts
    6
    Rep Power
    0

    Re: bizhub c35 firmware?

    thanks for your response, but i already found that pdf file. I'm new to the copier firmware scene, but i'm not willing to pay for firmware updates but thanks for your offer. so if someone has the firmware update software and is willing to share that without payment, let me know.


  8. #8
    Field Service Engineer 1,000+ Posts
    bizhub c35 firmware?

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    2,177
    Rep Power
    39

    Re: bizhub c35 firmware?

    The firmware only extends the life of the image units, you will still need to replace them or change the chips. 🍟

    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  9. #9
    Junior Member
    Join Date
    Jul 2017
    Posts
    6
    Rep Power
    0

    Re: bizhub c35 firmware?

    that i understand. problem is, it still prints just fine with imaging unit almost near 0%. I feel no need to replace the imaging units until they are really worn out


  10. #10
    Senior Tech 250+ Posts
    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    398
    Rep Power
    16

    Re: bizhub c35 firmware?

    yeah its a waste to change them before they are faulty. its like changing a toner when its only warning you its almost empty *looks at majority of my clients* lol


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •