Good Day Sir,
Do anyone have encountered Printing from AS/400 (IBM System) from Konica Minolta Bizhub C287. Which i have actually set all settings accordingly.
g. Font Identifier - 011
h. Form Feed - * Autocut
i. Manufacturer - *HP5si
j. Paper Source (both) - *letter
But the outcome is the printing margin have a cut-off on the right side of the print layout. If set according to the above settings, printing landscape is not an issue, but printing on portrait will be having issue on the cut off side edge. Have tried to adjust leading edge and also side edge. But still having problems.
Bookmarks