Lock document being scanned until completed

[JenniField]

We are using software that processing documents directly from the scanner.

We need one of the following to happen when scanning large documents:

• Lock the document until the user has finished scanning their stack
• Leave the document with the .tmp name until it finishes scanning, then when the user clicks finish it changes the name to .pdf
• Hold the document 'on the scanner' in internal memory until the user hits scan, then send the document to the network folder.

If anyone know of a way to make any of these, or all of these happen please let me know

Jenni

[Woxner]

try separate scan. it will let you build the scan so its one file. then hit finish to send. it will ask if you want to continue or finish. just contiue until all docs are scan then finish. email has limits. smb or ftp will take large file. by the way what machine?. which of the 3 are you doing

[JenniField]

Thank you Woxner, they were currently using separate scan but there appears to be a problem with it. There is a technician working with those users now because that feature wasn't working as it should. They first thought it was a firmware issue, since a firmware update hadn't been done in almost a year but that hasn't stopped the original issue.

They start scanning a document, it goes to the destination location as 0 bytes and the software grabs it.

I will update this string when I hear back.

Perhaps there is a different scanner I can suggest that either names the file .tmp or locks the PDF so that our software won't grab it. I think they are looking for an enterprise solution that they can use firm wide.

[rrrohan]

SMB or FTP scan? Im guessing SMB. Try FTP

[D_L_P]

In my experience seeing a 0 byte file has been due to having read/write but not modify rights. However you're not scanning via smb.

Is it possible to delete and recreate the scanner object in your scanning software?

IIRC certain scanning software,I wont name here, had a temp folder that had to have the contents deleted a couple times a uear. The folder would fill up and cause partial scan jobs or memory errors. Maybe the software you're using has a similar scanlog that needs cleared?

[BHM]

Not sure how much scanning is being done but you could scan the files into a temp folder and once the scanning is complete, manually move the files to the watched folder. This could file moving could be automated with software if need be.

I can not think of any way to lock the file until it is completed scanning or fo the machine to change the extension.

[allan]

Webdav?

[emujo2]

We are using software that processing documents directly from the scanner.

We need one of the following to happen when scanning large documents:

• Lock the document until the user has finished scanning their stack
• Leave the document with the .tmp name until it finishes scanning, then when the user clicks finish it changes the name to .pdf
• Hold the document 'on the scanner' in internal memory until the user hits scan, then send the document to the network folder.

If anyone know of a way to make any of these, or all of these happen please let me know

Jenni

The KM itself will not do any of these things, but if you are leaning towards a 3rd party solution like AutoStore you could get some custom workflows scripted for this. I would expect to spend upwards of 5-8K just for the scripting and a couple of thousand for the software and licensing. If they are currently using several people and many man hours to do this work, the cost is easily justified. After a little more thought, you might be able to use real time TWAIN to do # 3. HDD TWAIN may also be a possibility. Emujo


Just ran the TWAIN system with PDF Pro..You can scan the document, and re name it, convert it (format), then save/send to any location accessible from your workstation. Emujo

[rrrohan]

Can you set your software to only check the watched folder every few minutes so your less likely to be half way through scanning the document before it tries to use it? Sounds like its refreshing to often or possibly even Live

[Synthohol]

Agreed with above. The file header with 0 bytes is placed first while the scan is being compiled. This don't change but the frequency of the software polling can be I hope.