Results 1 to 3 of 3
  1. #1
    Junior Member harfan's Avatar
    Join Date
    Sep 2009
    Posts
    8
    Post Thanks / Like
    Rep Power
    0

    toner-end Magenta

    I have a Ineo+224e with a toner M problem,
    after 15 prints in only M color ,machine stops and comes with a toner-end,new bottle
    does not work?help please.


  2. #2
    Senior Tech 250+ Posts
    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    391
    Post Thanks / Like
    Rep Power
    16

    Re: toner-end Magenta

    Quote Originally Posted by harfan View Post
    I have a Ineo+224e with a toner M problem,
    after 15 prints in only M color ,machine stops and comes with a toner-end,new bottle
    does not work?help please.


    but if it thinks you have no toner its normally because the sub toner hopper isnt being supplied toner from bottle and if you keep printing like you are you may end up with TCR error.
    Check toner bottle is rotating. mark it with a perm marker or somthing. if thats spinning your hopper may be buggered


  3. #3
    toner monkey 100+ Posts jamesyboy's Avatar
    Join Date
    Jul 2010
    Posts
    179
    Post Thanks / Like
    Rep Power
    16

    Re: toner-end Magenta

    such errors are usually caused by the front bushing of the toner hoper getting bunged up : easy repair take off covers to reveal toner hopers clean end bushes , machines work ok if the bushing is removed , konica have upgraded the part due to these problems


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •