Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Dec 2016
    Location
    Melbourne
    Posts
    2
    Post Thanks / Like
    Rep Power
    0

    do you turn KM6500 power off when finish your work?

    I brought a second hand KM6501, cannot find any maintenance service in my area. all job need to by myself which make me really nervous.
    if any body can help in any kind will be really aprerciated.

    do you guy turn off all the switch after working?
    it is kept in my garage, the floor is not at same water level, it is possible to adjust coastal wheel (looks quite impossible) to make the main machine not tilt on one side?

    I try to connect the bulk paper cabinet connect, but after all the paper trays may not recognised and paper jammed, if make it flat level can make it in working order?


  2. #2
    Senior Tech 250+ Posts Woxner's Avatar
    Join Date
    Jul 2011
    Location
    Felixstowe England
    Posts
    349
    Post Thanks / Like
    Rep Power
    17

    Re: do you turn KM6500 power off when finish your work?

    hope you have ac in the garage. if you cant level this with the feet then use wood blocks with the leveling feet. if you are not trained you will be in trouble trying to service this. you have to do so many things in the right order otherwise everything else is off. this is not your basic copier. it also needs to run alot of copies to make it run properly. you can turn it off if you dont use it. shut the conntroller down first. This is not cheap to work on. pm is 2000 bucks dealer cost and you will never get the life out of the drums and dev and coronas so add extra cost. even more often if it sits or not used with 50000 color a month. 30 k might be ok


  3. #3
    Master Of The Obvious 10,000+ Posts


    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,004
    Post Thanks / Like
    Rep Power
    243

    Re: do you turn KM6500 power off when finish your work?

    Quote Originally Posted by alan2016 View Post
    ...
    do you guy turn off all the switch after working?
    No. Leave the switch On and let it go to sleep.

    Quote Originally Posted by alan2016 View Post
    ...
    it is kept in my garage, the floor is not at same water level, it is possible to adjust coastal wheel (looks quite impossible) to make the main machine not tilt on one side?
    If you mean casters, I would say that's not a good idea. The machine must be levelled to work properly. I would suggest building a slightly raised platform with a 3/4" plywood deck that is level. Keep in mind that the accessories must be rolled away from the base machine to service. If you build a platform 1" bigger the the copier's footprint (like I've seen plenty of people do) the accessories have to be lifted off of the platform to service, and they're not light. It would be better if the platform was 3' to 4' longer end to end. Another concern is that you garage is probably not climate controlled. You'll want your machine in an environment between 60F to 80F and 30% to 50% humidity at all times. You'll have a lot of problems otherwise.

    Quote Originally Posted by alan2016 View Post
    ...
    I try to connect the bulk paper cabinet connect, but after all the paper trays may not recognised and paper jammed, if make it flat level can make it in working order?
    Yes it is important to level up the paper feed unit. Being un-level will cause jamming.

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •