Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Service Manager 1,000+ Posts
    BH-363 mono, no "Frimwar" update...... :)

    Hansoon's Avatar
    Join Date
    Sep 2007
    Posts
    2,277
    Rep Power
    60

    BH-363 mono, no "Frimwar" update...... :)

    Done this a zillion times but this time I get instead of the firmware update screen the message:

    "External memory has been detected (installed). Currently, this feature cannot be used."

    Firmware A1UDFW.tar is on the same stick I always use. What's wrong? Is there a Frimwar going on?

    Hans

    " Sent from my Intel i286 using MS-DOS 2.0 "

  2. #2
    Service Manager 1,000+ Posts
    BH-363 mono, no "Frimwar" update...... :)

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    1,187
    Rep Power
    23

    Re: BH-363 mono, no "Frimwar" update...... :)

    forgive the simplicity of the question but you are using the service port and not the one on the panel right?
    also the flash drive should be a 4 gig or less on that model for best results and the drive should be formatted fat32.
    just checking the basics before i suggest a system data reset.


  3. #3
    Service Manager 1,000+ Posts
    BH-363 mono, no "Frimwar" update...... :)

    Hansoon's Avatar
    Join Date
    Sep 2007
    Posts
    2,277
    Rep Power
    60

    Re: BH-363 mono, no "Frimwar" update...... :)

    Yep, yep and yep. Thanks, but I'm using the same stick with software as always. I have for every machine and purpose a dedicated stick and never change them nor the firmware which is on it.

    Hans

    " Sent from my Intel i286 using MS-DOS 2.0 "

  4. #4
    Field Service Engineer 1,000+ Posts
    BH-363 mono, no "Frimwar" update...... :)

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    2,274
    Rep Power
    41

    Re: BH-363 mono, no "Frimwar" update...... :)

    Are you trying to update the firmware for a reason or just part of general maintenance? E.g does the Bizhub have a fault.

    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  5. #5
    Service Manager 1,000+ Posts
    BH-363 mono, no "Frimwar" update...... :)

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    1,187
    Rep Power
    23

    Re: BH-363 mono, no "Frimwar" update...... :)

    ok, i have had a few like that and 3/5 were fixed by a system data reset and movie data. the other 2 had to have the MFP board replaced.
    you can only backup the address book via pagescope sadly on the 3 series.


  6. #6
    Service Manager 1,000+ Posts
    BH-363 mono, no "Frimwar" update...... :)

    Hansoon's Avatar
    Join Date
    Sep 2007
    Posts
    2,277
    Rep Power
    60

    Re: BH-363 mono, no "Frimwar" update...... :)

    * solved * Weird! The connector from the photo sensor for the USB firmware socket was off. That's why the machine didn't know that the little cover was removed and it should start the firmware update procedure.

    Thanks for thinking with me guys.

    Hans

    " Sent from my Intel i286 using MS-DOS 2.0 "

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •