Key Counter On Bizhub 283

**gavrielx** · 08-20-2017

Hi everyone,
i just connect a Coin mechine to Bizhub 283.
i configure it to "Keycounter only" My problem is in the next situation:
if i have credit to copy only 5 pages and i try to print 6. the mechine pulls out 5 pages and Sticking the sixth page with "Paper Jam" Error.
I would love to get suggestions to deal with the issue if it is possible.
20170820_153156_Easy-Resize.com.jpg

20170820_153248_Easy-Resize.com.jpg

20170820_153254_Easy-Resize.com.jpg

tanks

**Woxner** · 08-20-2017

you need to adjust the time out on the coin machine.

**oldschool** · 08-22-2017

Key counter I/F vendor is the setting used with a coin box connected to the key counter.

**Synthohol** · 08-22-2017

what happens if you just select vender 2 bottom right instead.
for nothing else just to give it a shot.

**gavrielx** · 08-23-2017

Originally Posted by Synthohol

what happens if you just select vender 2 bottom right instead.
for nothing else just to give it a shot.

The mechine layouts all the pages and then close.
if i have crdedit for 5 and i do 7 the mechine print all the 7

**Synthohol** · 08-23-2017

damn, at least it didnt jam

thanks for trying it, i hoped it would have helped.

**oldschool** · 08-23-2017

Vendor 2 works with a specific interface only. "Key counter I/F vendor" should work correctly. What happens if you use that setting only.

NOTE:If that doesn't work, set dip sw 35 - 0 Stop print operation when key counter is removed.
0x00 - Stop print operation immediately [default]
0x01 -Stop print operation after paper inside the machine is ejected.