Hello Everyone.
Please i am using C7000 printer. Suddenly i got the error. (Error Code 3303). this Error is coming when i am sending job to print. and when i restart the printer the error will goes clear. What can cause of this error?
Thanks
Hello Everyone.
Please i am using C7000 printer. Suddenly i got the error. (Error Code 3303). this Error is coming when i am sending job to print. and when i restart the printer the error will goes clear. What can cause of this error?
Thanks
are you an End User? You can sometimes find a service manual on the web.. or go to the " Manual Request" forum here.
An error detection signal of
FM65 is detected
continuously for a
specified period of time
while the fusing cooling fan
(FM65) is ON.
• Conveyance drive board
(CDB)
• Fusing cooling fan
(FM65
unplug cooling fan, see if it goes away. if so bad fan, pinched wires, loose harness wires - fine that harness in generals breaks from constant removal in my shops.
Thanks everyone.
i removed the fusing unit and clean the fan and unplug and plug the connector again after fixing back printer started printing again. thanks alote for help. can someone help with me with manual. ii need a service manual.
thanks again
Bookmarks