Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Service Manager 1,000+ Posts
    konica minolta c3850fs ce password reset

    n25an's Avatar
    Join Date
    Jul 2008
    Location
    miami, florida
    Posts
    1,030
    Rep Power
    46

    konica minolta c3850fs ce password reset

    1. I changed a black drum on this model...
    then went to the service mode to print my reports after verifying all was well... it locked up on me... I entered 92729272
    that did not work... tried 9272927292729272 that did not work...
    so I wanted to reset ce and then disable it... no use putting another tech through this...

    another tech gave me this tip...

    1. Touch Menu
    2. Touch [Counter]
    3. Touch [Keypad]
    4. Press the following keys in this order: Stop > 0 > 9 > 3 > 1 > 7 (Nothing will happen on the screen)
    5. Wait 1 minutes before attempting the login again

    I was told one minute wait at the end and that did not work... so I did want any self respecting tech would do... go to the next service call...

    I did some research online and found that same solution on a muratec forum but with one change instead of 1 they say wait 5 minutes... so it would be something like this...


    later I did some research and found

    1. Touch Menu
    2. Touch [Counter]
    3. Touch [Keypad]
    4. Press the following keys in this order: Stop > 0 > 9 > 3 > 1 > 7 (Nothing will happen on the screen)
    5. Wait 5 minutes before attempting the login again

    3 questions...

    1. is this the correct way to reset the ce password on the 3850fs??
    2. is the ce password for the 3850fs 92729272??
    3. does anyone have a list of which machines are branded as muratecs but are really konicas???

    why you may ask... I found this answer on a muratec forum...

    Thanks for your help...
    Sad To Say I Don't Have a Life
    I do this stuff on the weekends too

  2. #2
    Senior Tech 100+ Posts selig67's Avatar
    Join Date
    May 2008
    Location
    Portland, OR
    Posts
    156
    Rep Power
    34

    Re: konica minolta c3850fs ce password reset

    this is from the service manual for the 3850

    (1) Procedure
    1. Touch Menu.
    2. Touch [Counter].
    3. Touch [Keypad].
    4. Press the following keys in this order.
    • Stop -> 0 -> 0 -> Stop -> 0 -> 1
    5. Touch the password input area and, using the keyboard on the screen, type the CE password.
    (The initial setting for CE password is "92729272.")
    6. Touch [OK].
    NOTE
    • Access attempts to the Service Mode with a CE password is limited to up to 3 times.
    If the number of invalid access attempts reaches three, your access is locked. Until access lock is released, the Service
    Mode is not accessible.
    To release access lock, turning OFF/ON the power switch and rebooting the machine is necessary.
    (When the machine is rebooted, the invalid access attempts count is cleared.)
    For the procedure to release the access lock, see “I.4.1.3 Procedure for releasing access lock.”
    • The service code entered is displayed as “ * ”.

    the relase lock is.......


    4.1.3 Procedure for releasing access lock
    1. Touch Menu.
    2. Touch [Counter].
    3. Touch [Keypad].
    4. Press the following keys in this order.
    Stop -> 0 -> 9 -> 3 -> 1 -> 7
    (With this procedure, activate the access lock release timer to start timing.)
    5. When five minutes has elapsed after activating the access lock release timer, the access lock will be released

  3. #3
    Service Manager 1,000+ Posts
    konica minolta c3850fs ce password reset

    n25an's Avatar
    Join Date
    Jul 2008
    Location
    miami, florida
    Posts
    1,030
    Rep Power
    46

    Re: konica minolta c3850fs ce password reset

    bless you...

    I go back to machine tomorrow....

    pray for me...

    I might kick the ....
    this is a family forum...
    you get the idea...

    Quote Originally Posted by selig67 View Post
    this is from the service manual for the 3850

    (1) Procedure
    1. Touch Menu.
    2. Touch [Counter].
    3. Touch [Keypad].
    4. Press the following keys in this order.
    • Stop -> 0 -> 0 -> Stop -> 0 -> 1
    5. Touch the password input area and, using the keyboard on the screen, type the CE password.
    (The initial setting for CE password is "92729272.")
    6. Touch [OK].
    NOTE
    • Access attempts to the Service Mode with a CE password is limited to up to 3 times.
    If the number of invalid access attempts reaches three, your access is locked. Until access lock is released, the Service
    Mode is not accessible.
    To release access lock, turning OFF/ON the power switch and rebooting the machine is necessary.
    (When the machine is rebooted, the invalid access attempts count is cleared.)
    For the procedure to release the access lock, see “I.4.1.3 Procedure for releasing access lock.”
    • The service code entered is displayed as “ * ”.

    the relase lock is.......


    4.1.3 Procedure for releasing access lock
    1. Touch Menu.
    2. Touch [Counter].
    3. Touch [Keypad].
    4. Press the following keys in this order.
    Stop -> 0 -> 9 -> 3 -> 1 -> 7
    (With this procedure, activate the access lock release timer to start timing.)
    5. When five minutes has elapsed after activating the access lock release timer, the access lock will be released
    Sad To Say I Don't Have a Life
    I do this stuff on the weekends too

  4. #4
    Senior Tech 250+ Posts mjunkaged's Avatar
    Join Date
    Feb 2009
    Location
    Seattle, WA
    Posts
    366
    Rep Power
    35

    Re: konica minolta c3850fs ce password reset

    Quote Originally Posted by n25an View Post
    bless you...

    I go back to machine tomorrow....

    pray for me...

    I might kick the ....
    this is a family forum...
    you get the idea...
    Be advised the access lock timeout can be set to UP TO 60 minutes on most models!! Lunch break??
    So if 5 don't work.......

  5. #5
    Service Manager 1,000+ Posts
    konica minolta c3850fs ce password reset

    n25an's Avatar
    Join Date
    Jul 2008
    Location
    miami, florida
    Posts
    1,030
    Rep Power
    46

    Re: konica minolta c3850fs ce password reset

    Quote Originally Posted by mjunkaged View Post
    Be advised the access lock timeout can be set to UP TO 60 minutes on most models!! Lunch break??
    So if 5 don't work.......
    LOL...
    Sad To Say I Don't Have a Life
    I do this stuff on the weekends too

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here