Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: C554 skewing

  1. #1
    Trusted Tech 50+ Posts
    C554 skewing


    Join Date
    May 2009
    Location
    Lonoke, AR
    Posts
    92
    Rep Power
    32

    C554 skewing

    Copier is skewing when making copies from the Document feeder and glass, but internal prints are not skewed

  2. #2
    Technician
    Join Date
    Jun 2016
    Location
    Dubai
    Posts
    33
    Rep Power
    16

    Re: C554 skewing

    Just adjust the ADF on the right side hinge . There will be a adjustable screws .

    Sent from my XT1562 using Tapatalk

  3. #3
    Trusted Tech 50+ Posts
    C554 skewing


    Join Date
    May 2009
    Location
    Lonoke, AR
    Posts
    92
    Rep Power
    32

    Re: C554 skewing

    I can see that if it was an ADF skew only but if I lay it on the glass I also get skew from all paper trays

  4. #4
    Master Of The Obvious 10,000+ Posts
    C554 skewing

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: C554 skewing

    Most likely the scanner frame had been bent by leaning on the corner. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Service Manager 1,000+ Posts
    C554 skewing


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,894
    Rep Power
    69

    Re: C554 skewing

    Quote Originally Posted by blackcat4866 View Post
    Most likely the scanner frame had been bent by leaning on the corner. =^..^=
    Grab the front left corner of scanner and give it a few upward jerks. Otherwise adj scanner position wgere it sits on wire. Youll only want to move it like 1mm or so.

    I try to see if it swuare by lining it up to a straight edge on the frame.

    I find its normaly when there is a shelf above copier. They lean on copier of rest boxes on adf but have had a few at runup too so yeah

  6. #6
    Trusted Tech 50+ Posts
    C554 skewing


    Join Date
    May 2009
    Location
    Lonoke, AR
    Posts
    92
    Rep Power
    32

    Re: C554 skewing

    Pulling up on the scanner did the trick, Thanks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here