Dislikes:
0
-
Junior Member
- Rep Power
- 0
-
Re: C284e error C2253 after being transported to a new location
Since machine had a hard move I would look at the PRCB board for damage / cracks, or loose connector. Also anything binded.
-
Re: C284e error C2253 after being transported to a new location
Dude if it has evidence of a rear impact you could be looking at a hairline crack on any board.
Looking at your picture it looks like a fairly hard impact.
Send it back to base/swap it out even if you fix that issue it could cause many headaches in the future!
-
Junior Member
- Rep Power
- 0
Re: C284e error C2253 after being transported to a new location
Thanks, most likely this is what I'll end up doing. Doesn't look like an easy fix. To bad this is a beast of a MFP.
-
Re: C284e error C2253 after being transported to a new location
They usually move ok without damage. I've had them shipped to me from hundreds of miles away and 99% of the time they are ok. And that's saying a lot if you saw some of the trucks & drivers!
-
Junior Member
- Rep Power
- 0
Re: C284e error C2253 after being transported to a new location
It depends if it is moved properly crated on a pallet vs ghetto style strapped inside a minivan. We got it ghetto style. With all the cartridges, drums, etc installed inside the printer. What are people thinking? Anyone with a service manual could share how to get to M2 motor?
-
Re: C284e error C2253 after being transported to a new location
All the machine I get always have the toners, dev units and drums left inside when shipped. I would rather have the consumables left in machine when transported. Better than being removed and drums exposed to light & dirt, Dev & toners mixed up between machines, etc.
As long as machines aren't tipped over drums, toner, devs are fine left in machine.
-
Re: C284e error C2253 after being transported to a new location
Here the CE manual but i'm not sure it will help!
https://mega.nz/#!sAkXwKLZ!k-SWcEjzFeMFbAdq9wC4KzYjwQzByIxI-ymqYOuSzOQ
-
Junior Member
- Rep Power
- 0
Re: C284e error C2253 after being transported to a new location
Thank you!
-
Technician
- Rep Power
- 26
Re: C284e error C2253 after being transported to a new location
We recently had one shipped to us from another dealer and it was shipped laid down on the right hand door side of the machine, on a pallet. Apart from one broken panel and scratches on every other panel, it worked okay.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks