Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Field Supervisor 500+ Posts
    Konica Bizhub C253 Transfer belt reset problem


    Join Date
    Jan 2012
    Location
    Tulsa, Oklahoma
    Posts
    544
    Rep Power
    20

    Konica Bizhub C253 Transfer belt reset problem

    I installed a 0.03125 amp fuse to reset the counter (Which I have successfully done several times). The Machine blew the fuse, Started to lay a patch test on the belt (About 4 inches) then came back up with the change transfer belt message.I put another fuse in it and same thing happened. This customer said the machine was also asking her to replace all the toners (I did not see that). The toners were all full... There is no way to reset the counters without a fuse I don't believe. Not really wanting to put a new transfer belt in it considering I don't think that is the problem... Anyone with any ideas how to get here up and running would be a big help...


  2. #2
    Service Manager 1,000+ Posts
    Konica Bizhub C253 Transfer belt reset problem

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    1,927
    Rep Power
    44

    Re: Konica Bizhub C253 Transfer belt reset problem

    Try flashing the machine with firmware. Then put in 160mA fuse.

    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  3. #3
    Field Service Engineer 1,000+ Posts
    Konica Bizhub C253 Transfer belt reset problem

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    2,266
    Rep Power
    41

    Re: Konica Bizhub C253 Transfer belt reset problem

    Quote Originally Posted by habik View Post
    Try flashing the machine with firmware. Then put in 160mA fuse.

    Yes seen this before, update the FW reboot, then fit a new fuse however with the new firmware you can disable this ITB warning message anyway.


    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  4. #4
    Service Manager 1,000+ Posts
    Konica Bizhub C253 Transfer belt reset problem

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    1,927
    Rep Power
    44

    Re: Konica Bizhub C253 Transfer belt reset problem

    Quote Originally Posted by copier tech View Post

    Yes seen this before, update the FW reboot, then fit a new fuse however with the new firmware you can disable this ITB warning message anyway.
    True, completely forgot about the SSW's

    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  5. #5
    Service Manager 1,000+ Posts
    Konica Bizhub C253 Transfer belt reset problem

    Hansoon's Avatar
    Join Date
    Sep 2007
    Posts
    2,273
    Rep Power
    60

    Re: Konica Bizhub C253 Transfer belt reset problem

    Quote Originally Posted by habik View Post
    Try flashing the machine with firmware. Then put in 160mA fuse.
    We use a 1/16 A or 0,063A or 63mA fuse for that.....

    Hans

    " Sent from my Intel i286 using MS-DOS 2.0 "

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Nov 2011
    Location
    Jacksonville, Fl
    Posts
    236
    Rep Power
    15

    Re: Konica Bizhub C253 Transfer belt reset problem

    Quote Originally Posted by Hansoon View Post
    We use a 1/16 A or 0,063A or 63mA fuse for that.....

    Hans
    We used to use 1/16 or 63ma fuse but some took several attempts, with verified good fuses and contacts. I suspect some power supplies are getting weak. We had good result from a lower amp fuse, I think about 25 or 30 ma? I do know that if the machine cannot stabilize, such as a P code is present, it will not blow the fuse nor reset the counter, so if it blew it, then move on to the FW suggestion above. You'll need a 256~512MB smart card and the FW imaging tool kit to burn it.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •