Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 9 of 9
  1. #1
    Technician
    Bizhub c284 "lines of shame"

    arahael's Avatar
    Join Date
    Mar 2013
    Posts
    35
    Rep Power
    0

    Bizhub c284 "lines of shame"

    Hello ! I have problem with KM. I done installation step by step more than 4 times. Blue and magenta stripes still stay only on copies... What to do next ?


  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Aug 2013
    Location
    New Philadelphia, OH
    Posts
    76
    Rep Power
    9

    Re: Bizhub c284 "lines of shame"

    Quote Originally Posted by arahael View Post
    Hello ! I have problem with KM. I done installation step by step more than 4 times. Blue and magenta stripes still stay only on copies... What to do next ?
    are you sure you set the time zone correctly? skipping this step will cause lines.


  3. #3
    Technician
    Bizhub c284 "lines of shame"

    arahael's Avatar
    Join Date
    Mar 2013
    Posts
    35
    Rep Power
    0

    Angry Re: Bizhub c284 "lines of shame"

    Done.... No idea what next brrrrtr


  4. #4
    Senior Tech 100+ Posts
    Bizhub c284 "lines of shame"

    Cookr's Avatar
    Join Date
    Dec 2011
    Location
    Metro Detroit Area,MI
    Posts
    183
    Rep Power
    13

    Re: Bizhub c284 "lines of shame"

    one time I didn't have the ADF serial number programed in and in cause the lines but it was on a B&W machine im pretty sure. Good luck


  5. #5
    Technician
    Join Date
    Mar 2017
    Location
    Alexandria, MN
    Posts
    11
    Rep Power
    2

    Re: Bizhub c284 "lines of shame"

    Have you made sure to do the non image erase check, where you turn the lights down and run the test???


  6. #6
    Technician
    Bizhub c284 "lines of shame"

    arahael's Avatar
    Join Date
    Mar 2013
    Posts
    35
    Rep Power
    0

    Re: Bizhub c284 "lines of shame"

    Quote Originally Posted by Vikingrepairguy View Post
    Have you made sure to do the non image erase check, where you turn the lights down and run the test???
    I made erase check, with ADF open. also when i go in service mode orange light on left blinking.... i have 2nd copier near and there is no blinking - but work all


  7. #7
    Field Service Engineer 1,000+ Posts
    Bizhub c284 "lines of shame"

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    2,179
    Rep Power
    39

    Re: Bizhub c284 "lines of shame"

    I have seen this a few times over the years on the c224 (non e) for me updating the fw then starting the install again fixed the issue.
    The process has been shortened on the later e models.

    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  8. #8
    Technician
    Bizhub c284 "lines of shame"

    arahael's Avatar
    Join Date
    Mar 2013
    Posts
    35
    Rep Power
    0

    Re: Bizhub c284 "lines of shame"

    Problem is solved: before next install i had to memory clear. Then search this forum and found that non "e" and "e" have not same install manuał.
    1. Display adjust>time setting in administrator> install datę

    Thank you for your assist


  9. #9
    Field Service Engineer 1,000+ Posts
    Bizhub c284 "lines of shame"

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    2,179
    Rep Power
    39

    Re: Bizhub c284 "lines of shame"

    Quote Originally Posted by arahael View Post
    Problem is solved: before next install i had to memory clear. Then search this forum and found that non "e" and "e" have not same install manuał.
    1. Display adjust>time setting in administrator> install datę

    Thank you for your assist

    Thanks for the update

    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •