Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 10 of 10
  1. #1
    Junior Member
    Join Date
    Sep 2017
    Posts
    4
    Rep Power
    0

    Unhappy bizhub c452 - error 2558

    Hi, My printer show error code 2558 , after developer replacement. (chip reset ).

    but when i power on again. show error 2558. and TCR level show 12% ~ 19% for black.

    - Trouble reset and Power up printer, NO ERROR DISPLAY ! BUT PRINTING DIRTY....
    bizhub c452 - error 2558-photo_-_-jpgbizhub c452 - error 2558-photo_-_-jpgbizhub c452 - error 2558-photo_-_-jpg

    Attached Images Attached Images

  2. #2
    Senior Tech 250+ Posts Max's Avatar
    Join Date
    Oct 2011
    Posts
    348
    Rep Power
    17

    Re: bizhub c452 - error 2558

    If you only reset the chip without replacing the developer then that will be your problem. Replace whole developer unit. It is possible there is a toner supply issue but i would replace dev unit 1 st.


  3. #3
    Technician nassor's Avatar
    Join Date
    Sep 2017
    Location
    DARESALAAM
    Posts
    23
    Rep Power
    1

    Thumbs up Re: bizhub c452 - error 2558

    Relaxing, no big issues, this because your developer has no toner. So just take a few amount of toner and put in your developer unit, and wait machine to run, then try printing, if not yet put in other toner then run the machine. Good luck


  4. #4
    Junior Member
    Join Date
    Sep 2017
    Posts
    4
    Rep Power
    0

    Re: bizhub c452 - error 2558

    Quote Originally Posted by nassor View Post
    Relaxing, no big issues, this because your developer has no toner. So just take a few amount of toner and put in your developer unit, and wait machine to run, then try printing, if not yet put in other toner then run the machine. Good luck
    Hi, tnx for help.
    - Reset the chip with change dev. but show error.
    - Add toner to the developer unit 2 times, TCR-K level up to 19%
    - Error code was received when the device was turned on and reached the stage of the image stabilizing
    - cannot printing.


  5. #5
    Technician nassor's Avatar
    Join Date
    Sep 2017
    Location
    DARESALAAM
    Posts
    23
    Rep Power
    1

    Re: bizhub c452 - error 2558

    Reset the code and try to print if toner is high remove the cartridge toner, and keep empty Cartredge with active chip.


  6. #6
    Junior Member
    Join Date
    Sep 2017
    Posts
    4
    Rep Power
    0

    Re: bizhub c452 - error 2558

    Quote Originally Posted by nassor View Post
    Reset the code and try to print if toner is high remove the cartridge toner, and keep empty Cartredge with active chip.
    Hey, two approaches to clearing trouble reset and rest system data error, but unfortunately as soon as I turn on the device error occurs during image stabilizing.
    - Removing cartridge toner
    - keep cartridge with active chip !
    ---- BUT CRAZY !!!!! show error imminently


  7. #7
    Service Manager 1,000+ Posts
    bizhub c452 - error 2558

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    1,935
    Rep Power
    44

    Re: bizhub c452 - error 2558

    High TCR means too much toner in develop unit. Do yourself a favour and try to do 30 sky shots without any toner bottle installed. Or if that is not possible, then try it from service in test mode > halftone > set density to 255 and print 30 x A3 Black (1PC)

    If there is no toner in developer and shows 19% , then just put new dev unit in as your old TCR sensor may be damaged.

    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  8. #8
    Technician nassor's Avatar
    Join Date
    Sep 2017
    Location
    DARESALAAM
    Posts
    23
    Rep Power
    1

    Re: bizhub c452 - error 2558

    Quote Originally Posted by K3nt View Post
    Hey, two approaches to clearing trouble reset and rest system data error, but unfortunately as soon as I turn on the device error occurs during image stabilizing.
    - Removing cartridge toner
    - keep cartridge with active chip !
    ---- BUT CRAZY !!!!! show error imminently
    Try to reduce your Developer.


  9. #9
    Technician nassor's Avatar
    Join Date
    Sep 2017
    Location
    DARESALAAM
    Posts
    23
    Rep Power
    1

    Re: bizhub c452 - error 2558

    This caused by developer charge and some time more toner


  10. #10
    Junior Member
    Join Date
    Sep 2017
    Posts
    4
    Rep Power
    0

    Re: bizhub c452 - error 2558

    tnx for help.

    Replacing with a new Black UI.

    Quote Originally Posted by nassor View Post
    This caused by developer charge and some time more toner
    How do you solve this problem?


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •