Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 1 of 1
  1. #1
    MFP Tech & I.T. Manager 100+ Posts MFPs R Now PCs's Avatar
    Join Date
    Jul 2011
    Posts
    131
    Rep Power
    14

    Angry Bizhub 501 Jams with 1302 Code

    We have a bizhub 501 jamming with 1302 codes when using the 3rd LCC/LCT tray. We performed cleaning of permanent rollers, sensors and one-way bearings, replaced all of the consumables tires, inspected for damage or wear on any mylar or plastic paper guides and it will run fine making many copies while we are standing right there testing it. Then it returns within a few days or a week.... Any thoughts on clutch/s in the 3rd tray vs motor/s clutch/s in the vertical transport section on the right side? Or anything else? Thanks in advance!

    Last edited by MFPs R Now PCs; 1 Week Ago at 04:05 PM. Reason: ensuring email alerts are correct
    It does not matter how slowly you go as long as you do not stop. –Confucius

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •