Thanks:
0
Dislikes:
0
-
Re: Konica Biz Hub 600 cleraner drive clutch question
Hey tonerjockey, glad it worked out for you. Actually that machine dropping toner is just the nature of "that" beast. Even with cleaning clutch running all the time it will still drop toner. As i have said before the main reason is developer gets contaminated from paper dust. Recycling toner is just a BAD design! Lucky to get 100k out of a developer. If possible you could have the cleaning unit clutch running even in sleep mode or machine turned off and it would still drop toner
One of the reasons I don't use my vacuum anymore is because I don't have any more of these toner pigs.
-
Re: Konica Biz Hub 600 cleraner drive clutch question
yea, i hardly ever use mine anymore. after i invested in an Atrix, and scuttled my noisy 3M.
-
Re: Konica Biz Hub 600 cleraner drive clutch question
Like copyman said, change the developer every 100K. That and keeping an eye on the web roller is the trick on these.
-
Re: Konica Biz Hub 600 cleraner drive clutch question
ok, great info. but Photoconductor stays on the normal cycle? i think off hand it was 250k, and the dev was 500k. but i will check.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks