Originally Posted by
tonerjockey
Hi Guys. this unit had a toner back up. i found the cleaner clutch on the inboard end of the toner recovery roller shaft was rusty. i disassembled and tried to clean and it still was not turning when i made a copy. i ordered a new clutch. when i returned to replace it, the old one was scorching to the touch. i replaced the clutch, and when i made some copies, the toner recovery auger tube gears were still not turning.
are the out board waste toner transport tube gears connected to another drive? arent those supposed to turn all the time when making a copy??
any help would be appreciated. have a very nice day, Jim
Bookmarks