Dp Swich List for KM C452

[Canonier]

Hello all
im trying to find the DP switch list for bizhub c452
anyone has it ?

Thank you!!

[Synthohol]

its in the service manual?

[Canonier]

no unfortunately is not.
i am trying to adjust the rotation speed of the transfer unit because of the classic grey lines on copies.
it is done by adjusting a dp switch...

[Synthohol]

what kind of lines? i cant find anything related on SSD. i tried belt, speed, transfer, lines, gray, grey, all separate searches and combinations of all.
only thing close was...
Error
P21

Root Cause
P21 with intermittent streaks on copies and prints.


Workaround/Fix
CAUSE: HV2 has failed leaving no bias voltage applied to the transfer belt cleaning brush.

SOLUTION: Please replace HV2 (p/n A0P0 M408 00).
i didnt know you can adjust belt speed since it has to match up with the fuser.

[copier tech]

Post a print out of the Bizhub test page, it is unlikely you willneed to adjust any dip switches for a copy/print quality issue.

[Woxner]

the soft sw are in the manual under service adjustments page I202

[Synthohol]

those are for CS Remote care, not like normal sw switches

[Canonier]

Sorry for the delay in my answer.
i am attaching a scan of the problem.
the machine has new K unit (both dev and drum.) the transfer unit is relatively new (70.000 prints)
and this happened. a friend tech told my about a dp switch to change the gear speed of the transfer unit.
any ideas ?img007.jpg

[Canonier]

Sorry for the delay in my answer.
i am attaching a scan of the problem.
the machine has new K unit (both dev and drum.) the transfer unit is relatively new (70.000 prints)
and this happened. a friend tech told my about a dp switch to change the gear speed of the transfer unit. img007.jpg

[Synthohol]

what is the issue? the skew? or the bottom of the carton paper effect?