Probably common on high mileage machines, but it was my first one to go so thought it may help someone. Possible cure for J3003.
CL 8 - A161M20100 in fuser drive went to pieces. Glad it didn't took out the PRCB as it wasn't far from judging from the coil wire being exposed.
Tip: If you happen to work on Kyo kit, then Kyocera clutch (303M894090 - CLUTCH 50 Z35R SP) can get you out of jail if you don't have Konica on board. Just swap the drive gear, hub and frame holder.
WP_20171019_13_16_54_Pro.jpgWP_20171019_13_44_09_Pro.jpgWP_20171019_13_44_18_Pro.jpgWP_20171019_13_44_28_Pro.jpg
Bookmarks