Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Mar 2010
    Location
    Lancaster Ohio
    Posts
    258
    Rep Power
    31

    Konica c35 dash marks

    Konica c35 has dash marks 1 inch wide down last side. Don't see marks on drum. Also get c-6790 code every now and then. If not drum what could cause dash marks. Thanks

  2. #2
    Service Manager 1,000+ Posts
    Konica c35 dash marks

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    2,015
    Rep Power
    59

    Re: Konica c35 dash marks

    Quote Originally Posted by DOE View Post
    Konica c35 has dash marks 1 inch wide down last side. Don't see marks on drum. Also get c-6790 code every now and then. If not drum what could cause dash marks. Thanks
    Dev. Clean or replace if over life. Comes as IU.

    Samples help too!



    Sent from my Mi A1 using Tapatalk
    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  3. #3
    Field Supervisor 500+ Posts
    Join Date
    Jan 2009
    Location
    UK
    Posts
    826
    Rep Power
    50

    Re: Konica c35 dash marks

    Check your transfer belt. I had one recently with a series of small squares on the prints. I was thinking it was the mfp board as it looked like a generated image, however it turned out to be the transfer belt not cleaning because it was blocked up. I cleaned out the waste area and the fault went away.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here