i have konica minolta ineo 4230 When shipped and subjected to stirring and now not running . The machine does not power on
i have konica minolta ineo 4230 When shipped and subjected to stirring and now not running . The machine does not power on
Are you sure machine was working before being shipped?
Start with checking for loose cables on PCR or MFP boards. Also check that ram memory did not come loose during shipping.
What your video shows is classic symptom of bad NVRAM. Try updating firmware with NVRAM reset tool
Last edited by rrrohan; 11-05-2017 at 11:56 PM. Reason: Typo on phone
Bookmarks