Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Senior Tech 100+ Posts Solotime's Avatar
    Join Date
    Feb 2009
    Posts
    222
    Rep Power
    20

    Bizhub 222 stuck in abort loop

    Checking on a slow printing issue for a customer and I inadvertantly set the Hard Disk to Installed. Now the machine keeps aborting. Can not get back into service mode to turn the HD back off unless there is another method? I tried the cold restart switch but that does not give me an option to enter service mode. Only worked on a couple of this older model.
    Any help with how to get around the constant reboot and get this working again?
    Thanks


  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Dec 2015
    Location
    Erie,PA
    Posts
    60
    Rep Power
    4

    Re: Bizhub 222 stuck in abort loop

    Some one has a job stuck in the printing cue. Unplug the network cable and it will boot up. Then you can go to each work station and find where the job is and delete it. That should fix that.

    KEN


  3. #3
    Senior Tech 100+ Posts
    Bizhub 222 stuck in abort loop

    Cookr's Avatar
    Join Date
    Dec 2011
    Location
    Metro Detroit Area,MI
    Posts
    184
    Rep Power
    13

    Re: Bizhub 222 stuck in abort loop

    Yep ^^^^ what he said


  4. #4
    Senior Tech 100+ Posts Solotime's Avatar
    Join Date
    Feb 2009
    Posts
    222
    Rep Power
    20

    Re: Bizhub 222 stuck in abort loop

    Thanks for the replay but that is not the issue here. Machine was working fine. I was in the service mode and set the hard drive to installed when it has no drive. As soon as I turned the machine off and on it started this abort sequence. It never comes to ready to receive a print job.


  5. #5
    Senior Tech 250+ Posts Max's Avatar
    Join Date
    Oct 2011
    Posts
    342
    Rep Power
    17

    Re: Bizhub 222 stuck in abort loop

    Boot up in error reset mode and do 9272 twice or 4 times that will get you into a service mode


  6. #6
    Service Manager 1,000+ Posts
    Bizhub 222 stuck in abort loop

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    1,153
    Rep Power
    23

    Re: Bizhub 222 stuck in abort loop

    Quote Originally Posted by Solotime View Post
    Can not get back into service mode to turn the HD back off unless there is another method? Thanks
    when you boot up holding down panel reset utility (forgot its an older machine) and get to the trouble reset screen, hit trouble reset and then stop 0 0 stop 0 1 and you get into service mode that way.
    also you may want to actually install a 360G HDD which you can then allow spooling on the device rather than tying up network/PC resources.

    Last edited by Synthohol; 1 Week Ago at 09:48 PM. Reason: older machine.

  7. #7
    Senior Tech 100+ Posts Solotime's Avatar
    Join Date
    Feb 2009
    Posts
    222
    Rep Power
    20

    Re: Bizhub 222 stuck in abort loop

    9272 does not work. I can get to the cold or trouble reset screen. Need to get back to service mode


  8. #8
    Aging Tech 1,000+ Posts
    Bizhub 222 stuck in abort loop


    Join Date
    Jul 2013
    Location
    Desboro
    Posts
    1,196
    Rep Power
    30

    Re: Bizhub 222 stuck in abort loop

    Quote Originally Posted by Solotime View Post
    9272 does not work. I can get to the cold or trouble reset screen. Need to get back to service mode
    Do you have a BH350 HDD you can install to allow it to get to ready so you can uninstall it?


  9. #9
    Technician
    Join Date
    May 2017
    Posts
    12
    Rep Power
    2

    Re: Bizhub 222 stuck in abort loop

    Look on the right side of the machine near the network plug, there should be a small cover, remove it and press the small black button.

    Machine will boot up and a small dot will appear on the right hand side of the screen, press "3"

    Then enter the service mode password "00000000" and hit END.

    From there try the usual stop, 0, 0, stop, 0, 1 to see if that gets you back into the correct screen.


  10. #10
    Senior Tech 100+ Posts Solotime's Avatar
    Join Date
    Feb 2009
    Posts
    222
    Rep Power
    20

    Re: Bizhub 222 stuck in abort loop

    None of the suggestions will work. If there is no way to get into the service mode other than using the utility/counter button method then I may just have to replace the machine


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •