Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: bizhub pro 951

  1. #1
    Junior Member
    Join Date
    Nov 2017
    Location
    Port Elizabeth
    Posts
    2
    Rep Power
    0

    bizhub pro 951

    Hi,

    I recently join this company, they have a b951 with these two errors, c-c2211 and c-c136.
    The fella replaced the printer controller board and did firmware.
    However the code persist.

    The c-c2211 is definitely the intermediate toner hopper motor as we swapped it to check on another and it produced the same code on another machine.

    Any help will appreciated.

    Thanx


  2. #2
    Master Of The Obvious 10,000+ Posts
    bizhub pro 951

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,319
    Rep Power
    247

    Re: bizhub pro 951

    I must not understand correctly.

    You swapped the toner hopper to another machine and the problem moved, yes? If yes, I think we can safely assume that the problem is in toner hopper assembly. So the question is ... what? =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  3. #3
    Technician
    Join Date
    Feb 2014
    Location
    timisoara
    Posts
    37
    Rep Power
    8

    Re: bizhub pro 951

    Quote Originally Posted by AdrianSKY View Post
    Hi,

    I recently join this company, they have a b951 with these two errors, c-c2211 and c-c136.
    The fella replaced the printer controller board and did firmware.
    However the code persist.

    The c-c2211 is definitely the intermediate toner hopper motor as we swapped it to check on another and it produced the same code on another machine.

    Any help will appreciated.

    Thanx

    i think you are asking for c-c136 code right?
    did your fella try to reinstall firmware for both oacb and icb ? i1 and p firmwares should be reinstalled.. if not .. you will have to replace both boards. and also check the wiring between the boards ...

    best of luck



Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •