Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Technician Ashbell's Avatar
    Join Date
    Sep 2017
    Location
    vic
    Posts
    17
    Rep Power
    14

    Cool 4 series warning message

    Hi everyone,

    i was wondering if anybody knew a way of disabling the warning message on the 4 series machines. this is the L-1 warnings and so on. They usually show up on the screen as an [!]. in the 8 series they only show up in service mode which works a lot better. is there a way to turn these off or not?

    Cheers
    Attached Images Attached Images

  2. #2
    Senior Tech 250+ Posts Zesti's Avatar
    Join Date
    Jun 2009
    Posts
    283
    Rep Power
    33

    Re: 4 series warning message

    Buddy,
    Just close your eyes to ignore the WARNINGS....
    There is something definitely not good enough in the machine and the machine is REQUESTING to check the problem before it got severe.

  3. #3
    Technician Ashbell's Avatar
    Join Date
    Sep 2017
    Location
    vic
    Posts
    17
    Rep Power
    14

    Re: 4 series warning message

    Quote Originally Posted by Zesti View Post
    Buddy,
    Just close your eyes to ignore the WARNINGS....
    There is something definitely not good enough in the machine and the machine is REQUESTING to check the problem before it got severe.
    Thanks for your reply. I do close my eyes to the warning but my customers don't. and good old Google tells them things that they don't really need to know. It would be easier if they could be disabled but if not i will just have to deal

  4. #4
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: 4 series warning message

    Don't tell anyone but set SW 51 to HEX F0 and SW 55 to 0C. This will disable messages and will not show warnings.
    Make sure NO STOP is enabled otherwise the machine will just do nothing (print stop in job log) if a life counter runs out.
    CSRC will still work and we can check the state of the machine from the office.
    Whatever

  5. #5
    Service Manager 5,000+ Posts
    4 series warning message

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: 4 series warning message

    Quote Originally Posted by allan View Post
    Don't tell anyone but set SW 51 to HEX F0 and SW 55 to 0C. This will disable messages and will not show warnings.
    Make sure NO STOP is enabled otherwise the machine will just do nothing (print stop in job log) if a life counter runs out.
    CSRC will still work and we can check the state of the machine from the office.
    These setting will have already been set thus the machine showing L-1, L-2 messages etc.

    Without those SW settings the machine would flash up on the screen "Replace C,Y.M Image units!"
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  6. #6
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: 4 series warning message

    Quote Originally Posted by copier tech View Post
    These setting will have already been set thus the machine showing L-1, L-2 messages etc.

    Without those SW settings the machine would flash up on the screen "Replace C,Y.M Image units!"
    Nice do you have a SW list for this series?
    SW 51 and 55 defaults is 0.
    Whatever

  7. #7
    Service Manager 5,000+ Posts
    4 series warning message

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: 4 series warning message

    Quote Originally Posted by allan View Post
    Nice do you have a SW list for this series?
    SW 51 and 55 defaults is 0.
    All the SW are listed in the manual
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  8. #8
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: 4 series warning message

    The manual only gives a couple. I guess they hide the rest for a good reason.
    Whatever

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here