Has anyone had this problem on an FS 534 finisher
IMG_0814.MOV - Google Drive
Thanks: 0
Likes: 0
Dislikes: 0
Has anyone had this problem on an FS 534 finisher
IMG_0814.MOV - Google Drive
Something like this maybe?
FS-534 alignment plate wearing.
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Originally Posted by blackcat4866
Yes I read that, but on the video it clearly show the arm moving in at the wrong time, as if it thinks it has reached it's count to push out the batch but hasn't noticed there is an extra sheet coming in, is that related to paper cuts?
Check the paddle rollers at the exit
I think that I would take a look. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Ive been out to it, it is letting through the next piece of paper it should be holding back while it ejects, or so it seems, I will have to look at the theory of operation,
What are the jam codes when this occurs ?
Abso-friggen-lutely papercuts in the alignment paddle. Change these bastards at least once a week these days. Classic symptom.
The updated version with even more metal just cuts elsewhere now so still not solved but will be good for a while with new ones.
Reply With Quote
Bookmarks