Its just showing Konica Minolta Logo..
I want download link for Latest Firmware and how to update Konica Minolta C454e details..
SOMEBODY HELP ME...
And from where to download firmware file
careitltr@gmail.com
Its just showing Konica Minolta Logo..
I want download link for Latest Firmware and how to update Konica Minolta C454e details..
SOMEBODY HELP ME...
And from where to download firmware file
careitltr@gmail.com
Last edited by careitltr; 11-30-2017 at 09:02 AM.
How many fins you see on startup?
Have you tried memory replacement?
Sent from my Mi A1 using Tapatalk
Firmwares HERE.OK Google! ... will I need Berrocca this morning?
Probably a dead SSD. Call the hotline. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
As habik suggests try to change the ram out.
If i struggle to get a machine started disconnect every thing from the MFPB that does not need to be there for the machine to boot. This include things like the HDD the AOCB(I/O board), fax...
As per BC its not unlikely for the SSD to be a problem.
KM does allow you to test boards, but its tricky. If you take the MFPB, SSD or AOCB from machine A to test in machine B you need to change only one at at a time and reinstall that board back into machine A and start it up again before taking the next one to test. Start with a SSD and if that is not the problem reinstall it to the original machine an start it up again. Then do the MFPB and then the OACB but i doubt it to be the problem.
If you don't do this carefully and somehow end up changing 2 boards at the same time the board will be unusable and would need factory data installed on it. This if for the engine data meter reading and licensing to remain intact.
Whatever
Bookmarks