Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 24
  1. #11
    Senior Tech 100+ Posts Zesti's Avatar
    Join Date
    Jun 2009
    Posts
    108
    Rep Power
    20

    Re: c224e counter reset

    Guys, tell you what. I got a BH363, the tech was stuck to clear the password. He messed up the NVRAM. When I fixed, the counters were 0000000.


  2. #12
    Field Service Engineer 2,500+ Posts
    c224e counter reset

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    2,742
    Rep Power
    51

    Re: c224e counter reset

    NVRam firmware if used incorectly will clear the main counters

    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  3. #13
    Senior Tech 100+ Posts Zesti's Avatar
    Join Date
    Jun 2009
    Posts
    108
    Rep Power
    20

    Re: c224e counter reset

    Quote Originally Posted by copier tech View Post
    NVRam firmware if used incorectly will clear the main counters
    Nop....BTW how to use NVR fw incorrectly?

    Sent from my RHYTHM RX60 using Tapatalk


  4. #14
    Field Service Engineer 2,500+ Posts
    c224e counter reset

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    2,742
    Rep Power
    51

    Re: c224e counter reset

    Quote Originally Posted by Zesti View Post
    Nop....BTW how to use NVR fw incorrectly?

    Sent from my RHYTHM RX60 using Tapatalk
    Not using it in the way it was designed for

    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  5. #15
    Senior Tech 100+ Posts Zesti's Avatar
    Join Date
    Jun 2009
    Posts
    108
    Rep Power
    20

    Re: c224e counter reset

    Quote Originally Posted by copier tech View Post
    Not using it in the way it was designed for
    Hmm..I'll dig deeply. But what about license management error.?

    Sent from my RHYTHM RX60 using Tapatalk


  6. #16
    Senior Tech 100+ Posts jotunn's Avatar
    Join Date
    Jan 2010
    Posts
    227
    Rep Power
    23

    Re: c224e counter reset

    Dig deeper within this forum There were solution for Licence Management error.


  7. #17
    Senior Tech 100+ Posts
    Join Date
    Mar 2009
    Posts
    222
    Rep Power
    21

    Re: c224e counter reset

    Quote Originally Posted by copier tech View Post
    NVRam firmware if used incorectly will clear the main counters
    This is very funny.
    Once I have reloaded printer firmware on C353 wherein job used to reached machine and only data light blinks & nothing happens.
    After loading firmware, meter showed 0.4 Billions, we all got zapped, but since it was a copy shop everybody accepted.
    So essence is that everything is possible with software/firmware(Firmware - different kind of software only, we just gives much more importance, since it is related to our machines, but can be tampered very easily)
    ENJOY


  8. #18
    Service Manager 1,000+ Posts
    c224e counter reset

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    2,004
    Rep Power
    46

    Re: c224e counter reset

    Quote Originally Posted by AjitN View Post
    This is very funny.
    Once I have reloaded printer firmware on C353 wherein job used to reached machine and only data light blinks & nothing happens.
    After loading firmware, meter showed 0.4 Billions, we all got zapped, but since it was a copy shop everybody accepted.
    So essence is that everything is possible with software/firmware(Firmware - different kind of software only, we just gives much more importance, since it is related to our machines, but can be tampered very easily)
    ENJOY
    try and resell that printer

    Sent from my Mi A1 using Tapatalk

    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  9. #19
    Junior Member
    Join Date
    Apr 2014
    Location
    pusan
    Posts
    9
    Rep Power
    0

    Re: c224e counter reset

    [QUOTE = Zesti; 585604] 얘들 아, 무엇을 말해. BH363을 가지고 있는데, 기술자가 암호를 지우려고했습니다. 그는 NVRAM을 엉망으로 만들었습니다. 제가 고칠 때, 카운터는 0000000이었습니다. [/ QUOTE]


    How to make BIZHUB C364 total counter "0"


    1. Power ON (next when booting is completed)
    2. MENU ⏎
    3. Counters
    4. Enter into service mode (Stop +00+ Stop + 01 + 9272927292729272 + OK)
    5. System setting 1 ⏎
    6. Initialization
    7. Delete individual data of data deletion Click all + OK
    (Caution: Please backup your fax setup data and address registration data in advance.)
    8. Enter serial number
    (If you want to keep the body serial number, write down all of them.)
    9. Press OK to return to service mode.
    10. System Settings 2 ⏎
    11. Software SW Setting
    12. Switch number
    13. If "10" is set to "02" in the input HEX designation, press "C" to make it "00", then press Confirm.
    Press switch number again and press 25 to display 60 in HEX designation.
    (The HEX number may vary depending on the model.)
    Take note of this part. Press OK to exit from service mode.
    14. Turn off the power and open the rear panel and use the tweezers enclosed with the battery of the main board to let it bounce for about 2 minutes.
    15. Plug the included "USB1" into the rear USB service port on the right side of the copier.
    16. Power ON
    17. Wait about 30 seconds and the boot screen will appear asking you to enter the serial number.
    18. Power off
    19. Plug the supplied "USB2" into the rear USB service port on the right side of the copier.
    20. Power ON
    21. If you wait about 10 ~ 20 seconds, you will see "C"
    Button.
    22. Press the YES button on NVram in the Clear Seleat section. ⏎
    23. START ⏎
    24. When Completed is displayed, turn off the power.
    25. Remove the USB cable on the back and turn the power on (remove the USB cable,
    Screw down)
    26. I get a message asking to insert the serial number.
    27. Enter the serial number and recovery license code you received when the serial number message appears.
    (Menu + Counter + Stop + 00 + Stop + 01 + 9272927292729272 + OK + System setting 1+ Marketing area + Others2 + Fax sending part set to KR + OK + Serial number input + Print + Serial number input + OK + System setting 2 + Software SW setting + Switch number + 10 + HEX designation + ⇨ + 02 + Confirm + Switch number + C + 25 + HEX designation +60 + Confirmation + OK + Firmware version display + OK + Stop + 9 + License management + Restore + Restore Enter Code + Confirm + Power OFF / ON)
    28. Menu + User Settings + System Settings + Language Selection + Korean + OK
    29. Enter the service mode, set up the hard and fax in System Setting 2, and enter the service mode when prompted to insert animation data.
    30. Optional - You do not need to do this.
    The serial numbers that you noted in step 8 are the serial numbers
    Clear the entry and enter the serial number of the print, scanner, or ADF you wrote down.


  10. #20
    Trusted Tech 50+ Posts
    Join Date
    Jul 2015
    Posts
    96
    Rep Power
    7

    Re: c224e counter reset



    Quote Originally Posted by jabatt View Post
    [QUOTE = Zesti; 585604] 얘들 아, 무엇을 말해. BH363을 가지고 있는데, 기술자가 암호를 지우려고했습니다. 그는 NVRAM을 엉망으로 만들었습니다. 제가 고칠 때, 카운터는 0000000이었습니다. [/ QUOTE]


    How to make BIZHUB C364 total counter "0"


    1. Power ON (next when booting is completed)
    2. MENU ⏎
    3. Counters
    4. Enter into service mode (Stop +00+ Stop + 01 + 9272927292729272 + OK)
    5. System setting 1 ⏎
    6. Initialization
    7. Delete individual data of data deletion Click all + OK
    (Caution: Please backup your fax setup data and address registration data in advance.)
    8. Enter serial number
    (If you want to keep the body serial number, write down all of them.)
    9. Press OK to return to service mode.
    10. System Settings 2 ⏎
    11. Software SW Setting
    12. Switch number
    13. If "10" is set to "02" in the input HEX designation, press "C" to make it "00", then press Confirm.
    Press switch number again and press 25 to display 60 in HEX designation.
    (The HEX number may vary depending on the model.)
    Take note of this part. Press OK to exit from service mode.
    14. Turn off the power and open the rear panel and use the tweezers enclosed with the battery of the main board to let it bounce for about 2 minutes.
    15. Plug the included "USB1" into the rear USB service port on the right side of the copier.
    16. Power ON
    17. Wait about 30 seconds and the boot screen will appear asking you to enter the serial number.
    18. Power off
    19. Plug the supplied "USB2" into the rear USB service port on the right side of the copier.
    20. Power ON
    21. If you wait about 10 ~ 20 seconds, you will see "C"
    Button.
    22. Press the YES button on NVram in the Clear Seleat section. ⏎
    23. START ⏎
    24. When Completed is displayed, turn off the power.
    25. Remove the USB cable on the back and turn the power on (remove the USB cable,
    Screw down)
    26. I get a message asking to insert the serial number.
    27. Enter the serial number and recovery license code you received when the serial number message appears.
    (Menu + Counter + Stop + 00 + Stop + 01 + 9272927292729272 + OK + System setting 1+ Marketing area + Others2 + Fax sending part set to KR + OK + Serial number input + Print + Serial number input + OK + System setting 2 + Software SW setting + Switch number + 10 + HEX designation + ⇨ + 02 + Confirm + Switch number + C + 25 + HEX designation +60 + Confirmation + OK + Firmware version display + OK + Stop + 9 + License management + Restore + Restore Enter Code + Confirm + Power OFF / ON)
    28. Menu + User Settings + System Settings + Language Selection + Korean + OK
    29. Enter the service mode, set up the hard and fax in System Setting 2, and enter the service mode when prompted to insert animation data.
    30. Optional - You do not need to do this.
    The serial numbers that you noted in step 8 are the serial numbers
    Clear the entry and enter the serial number of the print, scanner, or ADF you wrote down.



Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •