c224e counter reset

[xender79]

c224e Meter counter reset?

Help me

wotjq79@naver.com

[JR2ALTA]

can't be done. you're not the first to ask.
copiers are often resold so the meter count is protected by law.

[Zesti]

Somebody pl. help out xender79's innocent request.....


BTW Xender it can't be done. Order new NVRAM.

[Tech Helpdesk]

It can be done but it is all down to timing.
1 -- Remove from machine[
2 -- Place into microwave
3 -- Set microwave to 900 watts power
4 -- Set timer for 224 seconds (no more otherwise damage may occur)
5 -- Press start
6 -- When complete remove from microwave and refit

QUOTE=Zesti;585357]Somebody pl. help out xender79's innocent request.....


BTW Xender it can't be done. Order new NVRAM.[/QUOTE]

[Elmo]

Somebody pl. help out xender79's innocent request.....


BTW Xender it can't be done. Order new NVRAM.

If it was such an innocent request he would be better explaining his problem and why he would need the counters reset
he may get some help

most likely he wants to zero a machine to sell it as new
in this case he will get no help

[Albonline]

c224e Meter counter reset?

Help me

wotjq79@naver.com

replace, at the same time mfp,mc and ssd. voila, you got a new machine that you can rip somebody off with, good luck!

[Zesti]

replace, at the same time mfp,mc and ssd. voila, you got a new machine that you can rip somebody off with, good luck!

Wow....that easy.....Xander go for it.

Sent from my RHYTHM RX60 using Tapatalk

[habik]

It can be done but it is all down to timing.
1 -- Remove from machine[
2 -- Place into microwave
3 -- Set microwave to 900 watts power
4 -- Set timer for 224 seconds (no more otherwise damage may occur)
5 -- Press start
6 -- When complete remove from microwave and refit

QUOTE=Zesti;585357]Somebody pl. help out xender79's innocent request.....


BTW Xender it can't be done. Order new NVRAM.

[/QUOTE]Tried it and now the machine comes with 0 00000 on counter but its c coding with C164.
Has anyone got the latest firmware?

Sent from my Mi A1 using Tapatalk

[Phil B.]

It can be done but it is all down to timing.
1 -- Remove from machine[
2 -- Place into microwave
3 -- Set microwave to 900 watts power
4 -- Set timer for 224 seconds (no more otherwise damage may occur)
5 -- Press start
6 -- When complete remove from microwave and refit

QUOTE=Zesti;585357]Somebody pl. help out xender79's innocent request.....


BTW Xender it can't be done. Order new NVRAM.

[/QUOTE]


LOFL.

I hate when people try to screw a customer by trying to Zero Value the counters... totally dishonest

[habik]

c224e Meter counter reset?

Help me

wotjq79@naver.com

I'll tell you for 2 Ƀ

Sent from my Mi A1 using Tapatalk