Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    Senior Tech 100+ Posts alamsandhu's Avatar
    Join Date
    Jun 2010
    Location
    Doha
    Posts
    173
    Rep Power
    17

    Post BH C454e after replacing ITB message coming Drum unit and DV unit installation error

    at the end of life for 2nd time transfer belt for BH C454e, after replacing ITB the message starts coming Drum unit and Developing unit installation error.
    Please Advise
    ThanksIMG_20171202_185646.jpgIMG_20171202_185652.jpg


  2. #2
    Service Manager 1,000+ Posts
    BH C454e after replacing ITB message coming Drum unit and DV unit installation error

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    1,935
    Rep Power
    44

    Re: BH C454e after replacing ITB message coming Drum unit and DV unit installation er

    It shouldn't affect reading of chips when New Release for transfer belt is performed!

    Sent from my Mi A1 using Tapatalk

    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  3. #3
    Service Manager 1,000+ Posts
    BH C454e after replacing ITB message coming Drum unit and DV unit installation error

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    1,935
    Rep Power
    44

    Re: BH C454e after replacing ITB message coming Drum unit and DV unit installation er

    Remove the belt and check for damages or blade being flipped.


    Sent from my Mi A1 using Tapatalk

    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  4. #4
    Master Of The Obvious 10,000+ Posts
    BH C454e after replacing ITB message coming Drum unit and DV unit installation error

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,402
    Rep Power
    249

    Re: BH C454e after replacing ITB message coming Drum unit and DV unit installation er

    If you're getting messages that a drum and developing unit are not seated ... maybe a drum and developing unit is not seated. =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  5. #5
    Field Service Engineer 1,000+ Posts
    BH C454e after replacing ITB message coming Drum unit and DV unit installation error

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    2,272
    Rep Power
    41

    Re: BH C454e after replacing ITB message coming Drum unit and DV unit installation er

    Interesting issue.

    Was the machine working OK before you replaced the transfer belt?
    What was the reason you replaced the transfer belt?
    Did you power off the machine when you replaced it?

    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  6. #6
    Service Manager 1,000+ Posts
    BH C454e after replacing ITB message coming Drum unit and DV unit installation error

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    1,935
    Rep Power
    44

    Re: BH C454e after replacing ITB message coming Drum unit and DV unit installation er

    Quote Originally Posted by copier tech View Post
    Interesting issue.

    Was the machine working OK before you replaced the transfer belt?
    What was the reason you replaced the transfer belt?
    Did you power off the machine when you replaced it?
    Powering machine down or not for belt replacement don't really matter as the reset is via SM. Have done it both ways and never came with such messages.

    What I haven't tried is doing reset with belt not being present which would possibly throw Pcodes.

    Sent from my Mi A1 using Tapatalk

    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  7. #7
    Senior Tech 100+ Posts alamsandhu's Avatar
    Join Date
    Jun 2010
    Location
    Doha
    Posts
    173
    Rep Power
    17

    Re: BH C454e after replacing ITB message coming Drum unit and DV unit installation er

    Quote Originally Posted by copier tech View Post
    Interesting issue.

    Was the machine working OK before you replaced the transfer belt?
    What was the reason you replaced the transfer belt?
    Did you power off the machine when you replaced it?
    Machine was working fine just the ITB life was finished.
    it was power on during replacement it doesn't matter for the new Release articles.
    even after replacement machine was working for 1 day and the message is coming intermittent.
    even check for reconnect the wiring possible cause of grounding wires but no luck...


  8. #8
    Senior Tech 100+ Posts alamsandhu's Avatar
    Join Date
    Jun 2010
    Location
    Doha
    Posts
    173
    Rep Power
    17

    Re: BH C454e after replacing ITB message coming Drum unit and DV unit installation er

    Quote Originally Posted by blackcat4866 View Post
    If you're getting messages that a drum and developing unit are not seated ... maybe a drum and developing unit is not seated. =^..^=
    refitted and cleaned the terminals as well the spring connections to DV & Drum units. it works fine but intermittent error comes once or twice in a day. after restarting and open close the door several times it will disappear.


  9. #9
    Senior Tech 100+ Posts alamsandhu's Avatar
    Join Date
    Jun 2010
    Location
    Doha
    Posts
    173
    Rep Power
    17

    Re: BH C454e after replacing ITB message coming Drum unit and DV unit installation er

    Quote Originally Posted by habik View Post
    Remove the belt and check for damages or blade being flipped.


    Sent from my Mi A1 using Tapatalk
    removed the belt is fine even tested with old belt its the same.


  10. #10
    Service Manager 1,000+ Posts
    BH C454e after replacing ITB message coming Drum unit and DV unit installation error

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    1,935
    Rep Power
    44

    Re: BH C454e after replacing ITB message coming Drum unit and DV unit installation er

    Have you reloaded the firmware?

    Sent from my Mi A1 using Tapatalk

    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •