Problem solved by just only reattaching the two connectors of the CCD unit. Weird, but I'm happy.
Thanks for your help guys.
Hans
Problem solved by just only reattaching the two connectors of the CCD unit. Weird, but I'm happy.
Thanks for your help guys.
Hans
" Sent from my Intel 80286 using MS-DOS 2.0 "
Congratulations! =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
MFP board problem.
If you check memory in service mode, NG will be displayed.
Bookmarks