Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Senior Tech 100+ Posts Imsdal's Avatar
    Join Date
    Aug 2009
    Location
    Anderstorp
    Posts
    111
    Rep Power
    31

    C224e error C-155

    I have this C224e with a finisher FS-533 that show error C-155 after I upgraded the firmware with version GD8.
    In the process the display show Finisher N.G.
    So, i unplugged the finisher and I updated the machine.
    I installed the finisher again and the machine show error code C-155.
    I have restart the machine several times but the error remain.
    The finisher version in the machine is A2YV0Y0-D00-00.
    Do I have to update the finisher separated, cause I canīt find any firmware for the finisher.
    In the service manual its say: Rewrite the firmware or replace the FSCB. and I have try to rewrite 3 times.

    By the way the finisher was working fine before the upgrade.
    I there another way to fix this problem beside downgrade the firmware.

    Imsdal

  2. #2
    Senior Tech 100+ Posts Imsdal's Avatar
    Join Date
    Aug 2009
    Location
    Anderstorp
    Posts
    111
    Rep Power
    31

    Red face Re: C224e error C-155

    Hello

    I Have fix the problem.

    What I did was that I upgrade the finisher by itself when you insert the USB you can select:
    Controller, Printer, ADF and Finisher, I choose just finisher.

    Hope this can help if anybody else have this issue.

    Imsdal.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here