Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Senior Tech 100+ Posts alamsandhu's Avatar
    Join Date
    Jun 2010
    Location
    Doha
    Posts
    173
    Rep Power
    17

    BH C1085 Press always damaging the Lower Fusing Roller

    Bizhub C1085 Press always damaging the Lower fusing Roller (every 100 K) from the by the paper dust sticking on the temperature sensor protection cover. I have reduced the thickness by rubbing the sandpaper. now it is not touching to the roller but this time claw has damaged the roller within 15K prints.
    any idea to avoid by this problem IMG_20171205_155832.jpgIMG_20171205_155323.jpg


  2. #2
    Senior Tech 100+ Posts kmcopytech's Avatar
    Join Date
    Dec 2007
    Location
    DongGuan
    Posts
    131
    Rep Power
    22

    Re: BH C1085 Press always damaging the Lower Fusing Roller

    Fusing belt breakage

    QQ图片20171207213757.png

    The lower fusing roller damage is very few.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •