Client has a c284e that someone changed the password on. I can get to service mode but can’t change it. Any ideas how to set it back to default?
Client has a c284e that someone changed the password on. I can get to service mode but can’t change it. Any ideas how to set it back to default?
[QUOTE=mrfuser;586107]Client has a c284e that someone changed the password on. I can get to service mode but can’t change it. Any ideas how to set it back to default?[/QUOTE
If you somehow got into service mode. doing a data clear will reset the password to default I think.
if you got into service mode then hit stop 0 c then touch ce paswword you can just turn this off
I updated firmware and reset it then to default
FrImware resets CE pass? Is this a "new" feature? Pretty sure that didnt work on older models.
It does and when you go back into service mode you can set it as you like.
WHAT?
What in the world are you talking about?? You cannot get into CE pass without getting into SM FIRST--which requires the CE pass!
The basis of your inquiry is "Bizhub c284e Ce password reset?".... Someone correct me if I am wrong, but this person is fused (get it?).
Mind Blown....
I need Phil to come here am set me straight! (perhaps I am fundamentally mistaken?)
Firmware resetting the password as a tool is not likely. It might be possible that it reset a corrupt switch that allowed the password to work though. Other than that to reset the CE Password with the CE Authentication on you would normally need a NVRAM reset tool. Sometimes going through the "Trouble Reset" screen can allow you into service mode without a password. You can then use the "Stop, 0, Clear" to get into Security mode to reset the CE Password, Turn it off, or reset the Administrator password.
Calm down y’all, talking admin NOT ce
Bookmarks