Page 1 of 3 123 LastLast
Results 1 to 10 of 22
  1. #1
    Senior Tech 100+ Posts MVPunisher's Avatar
    Join Date
    May 2013
    Location
    hudson falls
    Posts
    148
    Rep Power
    11

    368 - new series DNS scan to smb issue

    I have ran across this at a few installs lately where the new series will not connect to a host name. Most of our customers are scanning to email or to a server where it is not an issue.

    But like today for an example. Replacing a bizhub 364e that scans to the 10 individual PCs on a smaller netowork. Plug the new copier in and it will only scan to ip address. Dns is correct, tried messing with all sorts of settings. I cannot ping the PCs host name from the copier. I can however ping the copiers host name from a Pc. I can also ping host names from pc to pc. So clearly DNS is working on the network, and even the copier "one way".

    Not the first customer where this has happened. Anyone see anything I'm overlooking. Thanks.


  2. #2
    Service Manager 1,000+ Posts
    368 - new series DNS scan to smb issue

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    1,181
    Rep Power
    23

    Re: 368 - new series DNS scan to smb issue

    did you use backup to external memory in admin mode on the old one and import to the new one?


  3. #3
    Senior Tech 250+ Posts Woxner's Avatar
    Join Date
    Jul 2011
    Location
    Felixstowe England
    Posts
    407
    Rep Power
    18

    Re: 368 - new series DNS scan to smb issue

    i will have to look it up but i think there is a soft sw to change.


  4. #4
    KonicaMinolta Senior Tech 50+ Posts srvctec's Avatar
    Join Date
    Oct 2009
    Location
    Central Kansas
    Posts
    81
    Rep Power
    17

    Re: 368 - new series DNS scan to smb issue

    Also check that SMB client setting v1/v2 is on. Had that cause issues many times.


  5. #5
    Trusted Tech 50+ Posts
    368 - new series DNS scan to smb issue


    Join Date
    Feb 2011
    Location
    Lafayette, LA
    Posts
    50
    Rep Power
    14

    Re: 368 - new series DNS scan to smb issue

    Seeing the same thing here and other strange issues.


    1. If sending to host name, will get a "folder not found" error.
    2. Upgrading a 4 series to an 8 series and can not longer send to host name, only ip address.
    3. Have a 308 that will scan to a 2012 r2 server for about an hour then fail with a server connection error. (Error code is for timeout error). Once it starts failing it must be rebooted. Brought in another 308 for testing and same issue. $ series works with no problem. Oddest thing is that when it fails to the server, it scans fine to a Win10 folder.

    Running function 4 firmware. Tried all smb setting combinations. The 4 series works fine with NTLM1.

    There is something about these 8 series that just is not right.


  6. #6
    KonicaMinolta Senior Tech 50+ Posts srvctec's Avatar
    Join Date
    Oct 2009
    Location
    Central Kansas
    Posts
    81
    Rep Power
    17

    Re: 368 - new series DNS scan to smb issue

    Quote Originally Posted by BHM View Post
    Seeing the same thing here and other strange issues.


    1. If sending to host name, will get a "folder not found" error.
    2. Upgrading a 4 series to an 8 series and can not longer send to host name, only ip address.
    3. Have a 308 that will scan to a 2012 r2 server for about an hour then fail with a server connection error. (Error code is for timeout error). Once it starts failing it must be rebooted. Brought in another 308 for testing and same issue. $ series works with no problem. Oddest thing is that when it fails to the server, it scans fine to a Win10 folder.

    Running function 4 firmware. Tried all smb setting combinations. The 4 series works fine with NTLM1.

    There is something about these 8 series that just is not right.
    I thought there was a function v4.1 F/W out, at least there is here in the states. G00-R9 is the one. Maybe it addresses these issues? It just came out in the last week or so.


  7. #7
    Senior Tech 100+ Posts kmcopytech's Avatar
    Join Date
    Dec 2007
    Location
    DongGuan
    Posts
    131
    Rep Power
    22

    Re: 368 - new series DNS scan to smb issue

    There are some strange problems in the 8 series。

    Try:

    1\Admin>Network>SMB Settings>SMB Server Settings>ON,

    2\Share SMB File Setting>ON,

    3\Closing the fast IP filter function.

    Update to GC2-54/G00-83 or latest FW.


    Jack.


  8. #8
    Trusted Tech 50+ Posts
    368 - new series DNS scan to smb issue


    Join Date
    Feb 2011
    Location
    Lafayette, LA
    Posts
    50
    Rep Power
    14

    Re: 368 - new series DNS scan to smb issue

    Quote Originally Posted by srvctec View Post
    I thought there was a function v4.1 F/W out, at least there is here in the states. G00-R9 is the one. Maybe it addresses these issues? It just came out in the last week or so.

    Yes, 4.1 was just released but no indication that it resolves any related issues but will try 4.1 Monday as a precaution.


  9. #9
    Service Manager 1,000+ Posts
    368 - new series DNS scan to smb issue

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    1,181
    Rep Power
    23

    Re: 368 - new series DNS scan to smb issue

    through the control panel can you search the shared network folder?


  10. #10
    Trusted Tech 50+ Posts
    368 - new series DNS scan to smb issue


    Join Date
    Feb 2011
    Location
    Lafayette, LA
    Posts
    50
    Rep Power
    14

    Re: 368 - new series DNS scan to smb issue

    Quote Originally Posted by Synthohol View Post
    through the control panel can you search the shared network folder?
    Have not tried while it was in a state of not working. Will try one day next week when it is not scanning.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •