Develop with 20.000, new drum and blade. I don't know why do that
Develop with 20.000, new drum and blade. I don't know why do that
Possibly dodgy drum.
Customer call me on Friday with this problem and changed drum and blade. Today call me again with the same problem
Since lines are perfectly even I would look at the print head (laser unit).
Just for funzies, check the drive gear on your developer unit. It almost looks like it stops turning for a moment.
Dev unit. replace it.
what direction is paper feeding? i was thinking dev unit skipping but doubt it because the way lines are perfectly even.
I changed the whole image unit and for now the problem has disappeared
Bookmarks