Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. #1
    Senior Tech 250+ Posts
    bizhub C224 has C2152 error code

    Samanator's Avatar
    Join Date
    Sep 2017
    Location
    Katy, Texas
    Posts
    411
    Rep Power
    35

    bizhub C224 has C2152 error code

    Cannot figure this out. The fuser motor turns when the machine powers up. I have checked sensor PS39 and I get a change of state when it is interrupted. I have tried another transfer unit and the code still comes up. I am not that experienced with Konicas so the book maybe saying something I do not understand. I need to get the machine working again. I would be very thankful for any help.

  2. #2
    Service Manager 2,500+ Posts
    bizhub C224 has C2152 error code


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    3,823
    Rep Power
    133

    Re: bizhub C224 has C2152 error code

    I have never seen this code on this model. Actually last time I saw it was a C253 which had a lot of issues with this trans belt code. Since you did everything mentioned in the serv manual then only thing I can think of is re-initializing the machine?

  3. #3
    Field Supervisor 500+ Posts Woxner's Avatar
    Join Date
    Jul 2011
    Location
    Felixstowe England
    Posts
    779
    Rep Power
    41

    Re: bizhub C224 has C2152 error code

    check IPC3 on printer control board. if you already changed the belt .

  4. #4
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,372
    Rep Power
    151

    Re: bizhub C224 has C2152 error code

    Have seen toner cover the retraction sensor. Ended up getting a thin rubber hose to blow it out. To get to the sensor by stripping could take a hour or three.
    The issue was more common on the C360 machines.
    Have changed out control board as well but was probably an ICP.
    There is a clutch i forgot to plug one other time...
    Whatever

  5. #5
    Service Manager 1,000+ Posts
    bizhub C224 has C2152 error code

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    2,015
    Rep Power
    59

    Re: bizhub C224 has C2152 error code

    Pull the belt out and check if the gear to engage CMY 1st transfer is possible to turn.

    Sometimes just reseating the belt sorts this issue.

    I had it once when replacing CL8 Clutch without taking the belt out of machine. After reseating belt all went away.


    Sent from my Mi A1 using Tapatalk
    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  6. #6
    Senior Tech 100+ Posts Laserbeam's Avatar
    Join Date
    Aug 2011
    Location
    Freiburg, Germany
    Posts
    152
    Rep Power
    27

    Re: bizhub C224 has C2152 error code

    Hello at all,

    yesterday I had the same code. Replacing with a new belt didn't succeed, after cleaning PS39 the malfunction still appeared!

  7. #7
    Service Manager 1,000+ Posts
    bizhub C224 has C2152 error code


    Join Date
    Feb 2010
    Posts
    1,986
    Rep Power
    75

    Re: bizhub C224 has C2152 error code

    Quote Originally Posted by Laserbeam View Post
    Hello at all,

    yesterday I had the same code. Replacing with a new belt didn't succeed, after cleaning PS39 the malfunction still appeared!
    Did you read the post? People pointed at ICP3 and/or controller board

  8. #8
    Senior Tech 100+ Posts Laserbeam's Avatar
    Join Date
    Aug 2011
    Location
    Freiburg, Germany
    Posts
    152
    Rep Power
    27

    Re: bizhub C224 has C2152 error code

    yes, I have read the whole post but unfortunately I forgot to ask for the value of the ICP3.
    How many amperes or milliamperes must have a new ICP?

  9. #9
    Certified Konica Expert 2,500+ Posts
    bizhub C224 has C2152 error code

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,916
    Rep Power
    216

    Re: bizhub C224 has C2152 error code

    none. you check for continuity. its a fuse. ohms not voltage.

  10. #10
    service technician 50+ Posts
    Join Date
    Feb 2018
    Location
    Kankakee, ill
    Posts
    51
    Rep Power
    13

    Re: bizhub C224 has C2152 error code

    had something similar on a c454 and it was in the fuser drive section with the clutch cl5 that drives the transfer belt, you will have to take the assembly out and inspect for worn items. it is a pain to take out.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here