Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Junior Member Samanator's Avatar
    Join Date
    Sep 2017
    Location
    Katy, Texs
    Posts
    5
    Rep Power
    0

    bizhub C224 has C2152 error code

    Cannot figure this out. The fuser motor turns when the machine powers up. I have checked sensor PS39 and I get a change of state when it is interrupted. I have tried another transfer unit and the code still comes up. I am not that experienced with Konicas so the book maybe saying something I do not understand. I need to get the machine working again. I would be very thankful for any help.


  2. #2
    Field Supervisor 500+ Posts
    bizhub C224 has C2152 error code


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    889
    Rep Power
    36

    Re: bizhub C224 has C2152 error code

    I have never seen this code on this model. Actually last time I saw it was a C253 which had a lot of issues with this trans belt code. Since you did everything mentioned in the serv manual then only thing I can think of is re-initializing the machine?


  3. #3
    Senior Tech 250+ Posts Woxner's Avatar
    Join Date
    Jul 2011
    Location
    Felixstowe England
    Posts
    417
    Rep Power
    19

    Re: bizhub C224 has C2152 error code

    check IPC3 on printer control board. if you already changed the belt .


  4. #4
    RTFM!! 2,500+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    2,588
    Rep Power
    51

    Re: bizhub C224 has C2152 error code

    Have seen toner cover the retraction sensor. Ended up getting a thin rubber hose to blow it out. To get to the sensor by stripping could take a hour or three.
    The issue was more common on the C360 machines.
    Have changed out control board as well but was probably an ICP.
    There is a clutch i forgot to plug one other time...

    Whatever

  5. #5
    Service Manager 1,000+ Posts
    bizhub C224 has C2152 error code

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    1,959
    Rep Power
    44

    Re: bizhub C224 has C2152 error code

    Pull the belt out and check if the gear to engage CMY 1st transfer is possible to turn.

    Sometimes just reseating the belt sorts this issue.

    I had it once when replacing CL8 Clutch without taking the belt out of machine. After reseating belt all went away.


    Sent from my Mi A1 using Tapatalk

    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •