Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    Former KM Senior Tech 500+ Posts srvctec's Avatar
    Join Date
    Oct 2009
    Location
    Central Kansas
    Posts
    827
    Rep Power
    63

    Re: Bizhub c3850 broken scanner belt

    Quote Originally Posted by EarthKmTech View Post
    Aannnd, they still snap.

    300+ of these in one customer, revised part number still breaks, regularly.
    Yeah, it's just a crap design since the strands in the belt only go lengthwise (when they fail, there are always strands sticking out from the inside of the belt, like it just pulled apart, sliding on the strands). I think what would help is if they need to make them with X pattern strands inside the belt and then change the crimp.

  2. #12
    Service Manager 1,000+ Posts
    Bizhub c3850  broken scanner belt

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Re: Bizhub c3850 broken scanner belt

    Thank you all for your tips! Great info to have. I ordered new belts, and before installing them I added a little dab of super glue gel to where the tabs are bent over the belt just to give it a little more strength. Seems to be working fine for the moment.

    Take care all !

    K

  3. #13
    Senior Tech 100+ Posts gitana1983's Avatar
    Join Date
    Mar 2009
    Location
    Miami, Florida
    Posts
    141
    Rep Power
    32

    Re: Bizhub c3850 broken scanner belt

    Quote Originally Posted by B0265 View Post
    KOM160433
    To improve the quality of the Scanner Belt in the Optical Unit, the following changes have been implemented
    for the Caulking Parts and Tension Coil Spring of the Scanner Belt.
    <Caulking Parts>
    - Change the Material (Brass => SUS)
    - Change the Tip Shape (Wave Shape => Flat)
    - Width Change of the Caulking Parts (4mm => 6mm)
    - Defines the hight of the Caulking Parts (2.9mm)
    <Tension Coil Spring>
    - Change the inner diameter of the hook part in the "inner diameter 5.55mm"

    Due to the above changes, the Parts Number of the Scanner Belt has been changed
    New Parts No.A121PP0N02
    Quick question, I have already replaced the belt but now is the scanner which is faulty but in the manual only shows the whole assembly, how can I get part number just for the scanner?

  4. #14
    Service Manager 1,000+ Posts
    Bizhub c3850  broken scanner belt

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    2,015
    Rep Power
    59

    Re: Bizhub c3850 broken scanner belt

    Quote Originally Posted by gitana1983 View Post
    Quick question, I have already replaced the belt but now is the scanner which is faulty but in the manual only shows the whole assembly, how can I get part number just for the scanner?
    What codes are you getting?

    Sent from portable device using fast cheapset!
    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  5. #15
    Service Manager 1,000+ Posts
    Bizhub c3850  broken scanner belt

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Re: Bizhub c3850 broken scanner belt

    Start a new thread

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here