Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Service Manager 1,000+ Posts
    Bizhub c3850  broken scanner belt

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,142
    Rep Power
    0

    Bizhub c3850 broken scanner belt

    I have client did just move two of these machines to a new office and both of them have a broken Scanner. belt

    Does anyone have a part number for the belt and how hard is it to replace


  2. #2
    RTFM!! 2,500+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    2,676
    Rep Power
    53

    Re: Bizhub c3850 broken scanner belt

    Just re-crimp and add glue to the joint. I fix that on the spot.

    Whatever

  3. #3
    Step aside, noob 1,000+ Posts EarthKmTech's Avatar
    Join Date
    May 2009
    Location
    Gigety
    Posts
    1,919
    Rep Power
    50

    Re: Bizhub c3850 broken scanner belt

    Part number A121PP0N02

    Piece of cake to change, keep one in stock.

    Same belt used in c35, c3350 & c3850 variants. All versions snap the same way.

    If at first you don't succeed, try the way I told you how to do it in the first place.

  4. #4
    Service Manager 1,000+ Posts
    Bizhub c3850  broken scanner belt

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,142
    Rep Power
    0

    Re: Bizhub c3850 broken scanner belt

    Thanks all for the tips. Any idea why they break?


  5. #5
    Senior Tech 250+ Posts Woxner's Avatar
    Join Date
    Jul 2011
    Location
    Felixstowe England
    Posts
    471
    Rep Power
    20

    Re: Bizhub c3850 broken scanner belt

    because when they moved them they slammed the scanner to one side most likey.


  6. #6
    Service Manager 1,000+ Posts
    Bizhub c3850  broken scanner belt


    Join Date
    Feb 2010
    Posts
    1,228
    Rep Power
    37

    Re: Bizhub c3850 broken scanner belt

    Its not easy for me, I spent an hour chasing my tail the first time. There's a pdf in this thread to help


    Konica Minolta bizhub C35 Scanner Belt Replacement.


  7. #7
    Step aside, noob 1,000+ Posts EarthKmTech's Avatar
    Join Date
    May 2009
    Location
    Gigety
    Posts
    1,919
    Rep Power
    50

    Re: Bizhub c3850 broken scanner belt

    The belts snap always at the end where the belt is folded over itself to form a loop and is crimped. The brass crimp ends up cutting all the way through the belt. Crap belt design, clearly just an existing off the shelf belt being modified to suit a specific application instead of being designed from the ground up for the task.

    If at first you don't succeed, try the way I told you how to do it in the first place.

  8. #8
    Senior Tech 250+ Posts B0265's Avatar
    Join Date
    Jan 2007
    Posts
    493
    Rep Power
    28

    Re: Bizhub c3850 broken scanner belt

    KOM160433
    To improve the quality of the Scanner Belt in the Optical Unit, the following changes have been implemented
    for the Caulking Parts and Tension Coil Spring of the Scanner Belt.
    <Caulking Parts>
    - Change the Material (Brass => SUS)
    - Change the Tip Shape (Wave Shape => Flat)
    - Width Change of the Caulking Parts (4mm => 6mm)
    - Defines the hight of the Caulking Parts (2.9mm)
    <Tension Coil Spring>
    - Change the inner diameter of the hook part in the "inner diameter 5.55mm"

    Due to the above changes, the Parts Number of the Scanner Belt has been changed
    New Parts No.A121PP0N02


  9. #9
    Trusted Tech 50+ Posts
    Bizhub c3850  broken scanner belt

    copyrooks's Avatar
    Join Date
    Oct 2013
    Posts
    93
    Rep Power
    10

    Re: Bizhub c3850 broken scanner belt

    Added the bulletin

    Attached Files Attached Files

  10. #10
    Step aside, noob 1,000+ Posts EarthKmTech's Avatar
    Join Date
    May 2009
    Location
    Gigety
    Posts
    1,919
    Rep Power
    50

    Re: Bizhub c3850 broken scanner belt

    Aannnd, they still snap.

    300+ of these in one customer, revised part number still breaks, regularly.

    If at first you don't succeed, try the way I told you how to do it in the first place.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •