Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: C558 fa14

  1. #1
    Field Supervisor 500+ Posts
    Join Date
    Jan 2009
    Location
    UK
    Posts
    550
    Rep Power
    26

    C558 fa14

    I have a tech who is struggling with a c558 which keeps randomly rebooting. In the data list it is shown as fa14.

    So far he has replaced the mfp board,disconnected the doc feeder,removed the dual scan board, reloaded the firmware and swapped the op panel with a good machine but it still happens. Even with the network cable out it will still reboot after about 5 minutes idling.

    Has anyone come across this before?

    I have a feeling I will be picking up this call so any ideas would be appreciated...


  2. #2
    Technician
    Join Date
    Mar 2016
    Location
    Lae
    Posts
    38
    Rep Power
    6

    Re: C558 fa14

    Quote Originally Posted by tech51 View Post
    I have a tech who is struggling with a c558 which keeps randomly rebooting. In the data list it is shown as fa14.

    So far he has replaced the mfp board,disconnected the doc feeder,removed the dual scan board, reloaded the firmware and swapped the op panel with a good machine but it still happens. Even with the network cable out it will still reboot after about 5 minutes idling.

    Has anyone come across this before?

    I have a feeling I will be picking up this call so any ideas would be appreciated...
    There is a firmware that fixes this error code. I've done firmware updates on 2 x similar model machines with this same error and got it fixed.


  3. #3
    Technician
    Join Date
    Mar 2016
    Location
    Lae
    Posts
    38
    Rep Power
    6

    Re: C558 fa14

    Hi

    This firmware version should fix the error code / fault:

    bizhub C658 Series Mass-Production Program Function Version4.0 (Ver. G00-Q)

    Thanks...


  4. #4
    Field Supervisor 500+ Posts
    Join Date
    Jan 2009
    Location
    UK
    Posts
    550
    Rep Power
    26

    Re: C558 fa14

    For future reference it turned out to be the Emmc board.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •