Results 1 to 9 of 9
  1. #1
    Technician
    Join Date
    Aug 2017
    Location
    Jeddah
    Posts
    44
    Rep Power
    1

    Miss feed detected on Konica Minolta C360

    alternatively getting Miss feed detected message while scanning from ADF (Konica Minolta C360)

    I didn't find out any miss feed, after restarting machine, it will work for while & again getting the same message

    I have attached herewith screenshot

    Attached Images Attached Images

  2. #2
    Field Supervisor 500+ Posts
    Miss feed detected on Konica Minolta C360


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    889
    Rep Power
    36

    Re: Miss feed detected on Konica Minolta C360

    Sounds like one of the sensors is either dirty or lever getting hung up. Did you open the spring loaded door on left underside of ADF and blow paper dust off black felt pad & sensor? When this felt pad has paper dust on it I have seen it cause intermittent jams and other strange things.


  3. #3
    Master Of The Obvious 10,000+ Posts
    Miss feed detected on Konica Minolta C360

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,522
    Rep Power
    251

    Re: Miss feed detected on Konica Minolta C360

    jam code? =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  4. #4
    Field Service Engineer 1,000+ Posts
    Miss feed detected on Konica Minolta C360

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    2,345
    Rep Power
    43

    Re: Miss feed detected on Konica Minolta C360

    Iím assuming you have replaced all the DF rollers?
    Where does the original stop? Is it catching? Check all the mylar guides, especially the small square ones they get small tears the paper will catch.

    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  5. #5
    Technician
    Join Date
    Aug 2017
    Location
    Jeddah
    Posts
    44
    Rep Power
    1

    Re: Miss feed detected on Konica Minolta C360

    Quote Originally Posted by blackcat4866 View Post
    jam code? =^..^=
    Not showing any error code
    It showing message as I attached above
    "misfeed detcted
    Remove paper indicated by 0"


  6. #6
    Master Of The Obvious 10,000+ Posts
    Miss feed detected on Konica Minolta C360

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,522
    Rep Power
    251

    Re: Miss feed detected on Konica Minolta C360

    Oh, maybe you could print a Management List? Around page 13 you'll find a long list of every jam that ever happened.

    The enduser screen is not of much use unless you turn on DIPSW 30-1 so the machine displays the actual jam code. It's call Collection Data mode.

    =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  7. #7
    Field Supervisor 500+ Posts Desert Rat's Avatar
    Join Date
    May 2008
    Location
    Valley of the Sun
    Posts
    819
    Rep Power
    28

    Re: Miss feed detected on Konica Minolta C360

    Blackcat,
    Thank you for your last post. I will cut and paste this one in my tech file.


    DR


  8. #8
    Technician
    Join Date
    Aug 2017
    Location
    Jeddah
    Posts
    44
    Rep Power
    1

    Re: Miss feed detected on Konica Minolta C360

    Quote Originally Posted by Desert Rat View Post
    Blackcat,
    Thank you for your last post. I will cut and paste this one in my tech file.


    DR

    Issue has been resolved

    I just reinstalled the Feeder roller and cleaned the ADF by using blower

    Now its working fine..


  9. #9
    Master Of The Obvious 10,000+ Posts
    Miss feed detected on Konica Minolta C360

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,522
    Rep Power
    251

    Re: Miss feed detected on Konica Minolta C360

    And still not jam code? This is no use to anybody.

    Use the resources that are available to you. We all use jam code numbers to identify specific jams. You don't know if you were even in the right part of the machine. =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •