Results 1 to 6 of 6
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Oct 2011
    Posts
    110
    Rep Power
    15

    Bizhub 654e , firmware update error

    Hello . We tried to perform the firmware update on two copiers Bizhub 654e. On one machine the operation was performed correctly .On another machine operation is not performed ( message =MFP no good= on touch panel) .Firmware version does not matter .We will be grateful for any advice.


  2. #2
    Senior Tech 100+ Posts
    Join Date
    Oct 2014
    Location
    wareham.mass
    Posts
    225
    Rep Power
    10

    Re: Bizhub 654e , firmware update error

    Quote Originally Posted by pinspin View Post
    Hello . We tried to perform the firmware update on two copiers Bizhub 654e. On one machine the operation was performed correctly .On another machine operation is not performed ( message =MFP no good= on touch panel) .Firmware version does not matter .We will be grateful for any advice.
    SSD....pwa bad....that happen to me

    Sent from my SM-N920V using Tapatalk


  3. #3
    Senior Tech 250+ Posts Woxner's Avatar
    Join Date
    Jul 2011
    Location
    Felixstowe England
    Posts
    452
    Rep Power
    19

    Re: Bizhub 654e , firmware update error

    does this have bizhub secure on it? also try loading one file at a time.


  4. #4
    Master Of The Obvious 10,000+ Posts
    Bizhub 654e , firmware update error

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,886
    Rep Power
    257

    Re: Bizhub 654e , firmware update error

    Quote Originally Posted by Woxner View Post
    ... also try loading one file at a time.
    That's my advice too. I've had a few Toshibas, and a few Konica Minoltas that would not successfully load the whole firmware set. But if you load it one or two files at a time, then go right back into firmware mode and load one or two more files, as many times as necessary, I was able to get firmware updated and functioning.

    We did have a Konica Minolta finisher in our shop recently that absolutely would not take any level of finisher firmware, but took everything else. When that finisher was swapped to a different MFP it did take the firmware, and when swapped back it does work. I'm assuming that there's something wrong with the MFP board on the base MFP, to prevent the successful loading. For now though that's how it will stay.
    =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  5. #5
    Junior Member
    Join Date
    Jan 2018
    Location
    NJ
    Posts
    2
    Rep Power
    0

    Re: Bizhub 654e , firmware update error

    Probably going to sound weird but:

    Removal of the options may assist with being able to update the MFP firmware. I've had several occasions where I've had to remove the ADF/Fax board, etc and then update just the MFP and it worked.

    For the fax board, I physically removed it because it connects to the board directly, but I just unplugged the ADF wires from the board, obviously.


  6. #6
    Senior Tech 100+ Posts
    Join Date
    Oct 2011
    Posts
    110
    Rep Power
    15

    Re: Bizhub 654e , firmware update error

    Thanks for the help, friends. It was a problem in the memorial modules.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •