Thanks:
0
Likes:
0
Dislikes:
0
-
Konica Bizhub 363 Says ready to copy then won't print
The scanner will scan the document then comes up with print error on the Job log. I reloaded the firmware formatted the hard drive and unset then disconnected the fax. Th initial call was C0210 LCT Lift Failure. I disconnected the LGC drawer then this is what was to follow. Any ideas would be very helpful... Thankls so much !!!
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks