LinkBack URL
About LinkBacks
Reply With QuoteEnter service mode, touch 8(parts life counter) then start, then press 2 (pc life counter) press clear. The drum, developer, and blade counts will all zero out if you run an F8 also.
unit: Konica Minolta CSpro Ep2030
problem: opc drum Counter (RESETTING 'REPLACE DRUM' MESSAGE)
Last edited by itwasntmhee; 09-11-2008 at 03:29 AM.
Enter service mode, touch 8(parts life counter) then start, then press 2 (pc life counter) press clear. The drum, developer, and blade counts will all zero out if you run an F8 also.
thanks..
can you give me the exact steps?
im sorry because im not a technician...
thanks in advance..
To enter service mode:
touch METER COUNT then
STOP ZERO ZERO STOP ZERO ONE
this is service mode. the easiest way for you would be to remove your toner bottle, then touch ONE the screen will say F then touch 8 and press start and the machine will do an ATDC adjustment. When it finishes, touch panel reset twice to return to user mode, and put your toner bottle back in. YOU MUST REMOVE YOUR TONER BOTTLE BEFORE YOU RUN THE ADJUSTMENT.
If this doesn't clear your message, then enter service mode and do the steps in the previous post.
Darn, I never knew that. Always zeroed the port counter prior to F8. Or is my memory failing me and the 2030 was fancier/more advanced than the 2050?Originally Posted by lvangsnes
The 2030 is a newer machine than the 2050. I did like the 2050 for its copy quality, but its older siblings were really junk as far as the d/u
thanks...but not work for me...
Everything you need is there.
How to stop counter of KONIKA MINOLTA BIZHUB C252
Turn off the copier! Or don`t make any copies!! Why do you want to stop the counter?
Last edited by minimerlin; 10-19-2008 at 10:47 AM. Reason: spelling mistake!
Posting Permissions 
Bookmarks