good day guys. any one have experience this i have try to swap the drum and clean the laser unit but the white line is still there. pleased see the picture pleased. thanks in advance 20180125_095251.jpg
good day guys. any one have experience this i have try to swap the drum and clean the laser unit but the white line is still there. pleased see the picture pleased. thanks in advance 20180125_095251.jpg
there is no glory without sacrifice
laser unit new.
How the other halftones look like?
White voids be Dev unit or laser dirty.
If belt is worn and has some embossed lines from blade it can do similar lines. You should be able to match them with the rest of colours.
Sent from portable device using fast cheapset!
Firmwares HERE.OK Google! ... will I need Berrocca this morning?
it only happen in magenta color guys. and when i check the developer there is no white line in magnetic roller.
and the transfer belt is still look good. the total count of this machine is just 15k . 7k on color and 8k on black.
Last edited by smiley; 01-25-2018 at 06:01 AM.
there is no glory without sacrifice
Try initialise and stabilise background reset and full Gradation afterwards.
Sent from portable device using fast cheapset!
Firmwares HERE.OK Google! ... will I need Berrocca this morning?
thanks for your response friend i will try when i go back to the machine.
there is no glory without sacrifice
Dear Thread
try to change drum magenta with cyan! if the problem appear on cyan you should try to clean the charger if you can't do that replace the drum unit.
Thanks and best regards
------------------------------
Ahmed Bushara
Electronic Engineering technician
Mobile: +249-999198804 /+249-123198804
Have had issues with the dev units doing this.
to update you guys the void lines is happening in all color but only more visible on magenta color. i see some toner remain in transfer belt. i will try to clean it or replace the cleaning blade and inform you guys if this will solve the problem.
there is no glory without sacrifice
Bookmarks