OPC drum has scraches and i must replace it. Do i have to replace developer too? if i replace only drum and blade and not developer do i have any problem?
OPC drum has scraches and i must replace it. Do i have to replace developer too? if i replace only drum and blade and not developer do i have any problem?
If the print quality is ok (except for the drum scratches) and if the developer isn't over life, then, if I remember correctly, there should be no reason to replace the developer.
Anyway it would be wise to take a developer bag with you just in case.
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
if the DV life is under 60% you may get away with it.
just do your LD1s and LD@ adjustments. and reset the drum and blade counters.
i usually set them so the first shading blocks just shows up just over the line. saves for overtoning and the mess it becomes.
You can replace the drum and blade without the developer, np.
Bookmarks