Thanks: 
Likes: 
Dislikes: OPC drum has scraches and i must replace it. Do i have to replace developer too? if i replace only drum and blade and not developer do i have any problem?
OPC drum has scraches and i must replace it. Do i have to replace developer too? if i replace only drum and blade and not developer do i have any problem?
If the print quality is ok (except for the drum scratches) and if the developer isn't over life, then, if I remember correctly, there should be no reason to replace the developer.
Anyway it would be wise to take a developer bag with you just in case.
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
if the DV life is under 60% you may get away with it.
just do your LD1s and LD@ adjustments. and reset the drum and blade counters.
i usually set them so the first shading blocks just shows up just over the line. saves for overtoning and the mess it becomes.
U can replace drum bladeOriginally Posted by Gab
Sent from my SM-N920V using Tapatalk
You can replace the drum and blade without the developer, np.
Reply With Quote
Bookmarks